How To Confirm Replacement Exterior Baggage Door Latch for a 2003 Damon Intruder Motorhome

Question

Question:

I am looking for replacement latches for the outside compartments for my 2003 Damon intruder. Can you please recommend the correct ones? Thanks!

asked by: Scott V

0

Expert Reply:

In order to find an exact replacement for the exterior baggage door latches on your 2003 Damon Intruder Motorhome I would need some sort of part number to reference. The latches you have now look very similar to the Lippert Components Slam Latch Baggage Door Handle part # LC317649 but I would again need a part number to confirm.

expert reply by: Conner L

0

Mike

3/7/2024

morning the only # i can find on it is 30205 made in China. the lock shalt is 6 inchs long and the key # is CF315. any info you can give me will help Thanks

Mike L.

3/7/2024

@Mike The 30205 latch you mention was originally manufactured by Fastec. We offer a direct replacement from Global Link, part # 295-000015. Unfortunately though, we can't get it keyed to a specific lock.

Chad

5/26/2026

@MikeL I am looking for the same exact latch Mike is inquiring about. I purchased a pair of the Global Link #295-000015 that you referenced but the plunger is not long enough so they will not work. The latch fits perfect otherwise. The total plunger length needs to be 6” and these Global Link ones are about 2” shorter than what is needed. The number on my latch is the same that Mike mentioned and I also have an Damon motorhome. Any help getting the correct latch would be appreciated.

Answer 1

Hiya Marty. While I wish I could look up exactly what your 2001 Damon Intruder 375 came with I have no access to a parts lookup from the manufacturer. Based on images and videos I found it looks like the Global Link RV Baggage Door Slam Latch…

view full answer...

Answer 2

We don't have a database that tells us the precise slam latch that's on your coach, but we do have a wide variety of them available. You may want to check out the Global Link RV Baggage Door Slam Latch - Black - 1-3/4" Thick #295-000078…

view full answer...

Answer 3

You'll need to use the #C59496 that you referenced to install first a 7-way on your dump truck and then to convert to a 7-way you'd just need the #37185 or if you plan to install a brake controller #ETBC7. For a controller the Brake EVN…

view full answer...

Answer 4

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

Hey Jordan! Based on your measurement you have a Lippert 1116 or 1716. If you want to confirm that feel free to send me the S/N on your pin box. The Gen-Y Nomad you were looking at is for the Rhino Box so that is not a fit. What you need is the Gen-Y…

view full answer...

Answer 7

Hey Jon; I was actually just talking to Furrion about heat options for the Chill Cube yesterday (1/21/2025). At this time, the only way to have heat with this unit is through a furnace on a ducted setup. The Furrion Chill Cube RV AC w/ Air…

view full answer...

Answer 8

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 9

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 10

Hey Evan, if you want to use an offset ball like the Gen-Y gooseneck ball part #GY23XR that you referenced it will have to use the bracket that goes between the ball and the anchors for the safety chain loops. This is because normally the ball can…

view full answer...

Answer 11

That depends, Sylvia, but likely not if yours are McCoy-style seats. The Thomas Payne #TP28AR fits the Dellmead recliners #TP45AR and #TP42AR. For McCoy versions #TP75AR and #TP72AR, you’ll need the #TP33AR instead - same width, same fitment, just…

view full answer...

Answer 12

Hey there Kirt. If your coach already has Thomas Payne theater seating, the Seismic line Dellmead #TP42AR / #TP45AR or McCoy #TP72AR / #TP75AR is the natural step up. You’ll gain heat, massage, LED lighting, and USB-C ports, all while keeping the…

view full answer...

How To Confirm Replacement Exterior Baggage Door Latch for a 2003 Damon Intruder Motorhome

Product Page this Question was Asked From

Continue Researching