How To Find Correct Wheel Bearing for Trailer
Updated 07/08/2019 | Published 07/07/2019
Question:
Neet bearing for a karavan hub Knott ZH
asked by: Bob H
Expert Reply:
In order to find the correct wheel bearings you can take apart your hub assembly and looking at the bearings themselves; wipe away the grease and you should be able to see the part number stamped directly on them. If you are unable to find them, you need to use a digital caliper and measure your spindle to the thousandths of an inch where the bearings ride. You can use the photo I've attached to see exactly where you need to measure.
I've also added a link to a help article on common bearing sizes, as well as a link to our available bearing kits.
Product Page this Question was Asked From
Bearing Kit, 14125A/25580 Bearings, GS-2125DL Seal
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing 14125A and 25580
- Race 25520 and 14276
- 7000 lbs Axle
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Karrier ST225/75R15 Radial Tire with 15" White Spoke Wheel - 5 on 4-1/2" - Load Range D
- Shop: Square Direct Weld Jack - Drop Leg w/ Spring Return - Sidewind - 28-3/4" Lift - 12K
- Shop: Stand for SL-25 25 Gallon Corner Water Caddy
- Shop: Window Net, 25" x 36"
- Shop: Bearing Kit, 14125A/25580 Bearings, GS-2125DL Seal
- Article: Most Popular Wheel Bearings
- Article: Electric Trailer Brakes: How They Work & What to Buy
- Q&A: Bearings and Races for 7,000 Pound Trailer Axle
- Q&A: Correct Replacement Bearings and Seals for Dexter 7,000 Lb Axle
- Q&A: Replacement Bearings for a Dexter 7,000 lbs Axle and Wet Bolts for a Morryde CRE 3000
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Trailer Wiring Diagrams
- Q&A: Lug Nut Torque Spec for a 1/2 Stud with Coned Lugs on a 15 in Steel Wheel
- Q&A: Looking For Replacement Slipper Springs For My 7k Dexter Axle
- Q&A: Replacement Bearings, Races, and Seal for Lippert 7,000 Pound Axle
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Q&A: Do I Have to Use Timken Races with Timken Bearings, or can I Use Mine that were Made in China?
- Article: Stability Control for Heavy Duty Vehicles
- Article: Adding Electric Over Hydraulic Disc Brakes