Can BOLT Locks Be Re-Coded to New Vehicle After Initial Use

Question

Question:

If I buy all the different locks I need key to the car key, then change cars next year will i not be able to fit to new car key?

asked by: Rodger

0

Expert Reply:

The BOLT Hitch Locks such as # BL7023582 can be coded to a vehicle key only one time.

This one-time coding is permanent. This means that if you change vehicles you will need to purchase new BOLT locks and code them to the new vehicle's key. Of course, if you sell your old vehicle the installed BOLT locks will remain coded to and usable with that vehicle's key.

expert reply by: Adam R

0

Answer 1

I would not be able to tell you which Equal-i-zer system to get because in order to determine if you need the 1,200 lbs system #EQ37120ET or 1,400 lbs system #EQ37140ET you have to know your total tongue weight (TTW), which is the which is the tongue…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

Hello again Frank; tongue weight is typically 10-15% of your trailer weight. At 5,400 lbs you could go over the max 800 lb tongue weight of the #FA94-00-0800 but that probably isn't the case here. If you really want to be sure you could always…

view full answer...

Answer 4

Hey Vernon, great to hear from you again! For your trailer that has a GVWR of 11,295 lbs I actually recommend stepping up one level and going with the 18.5K #WS49MR which has the same 6" drop and fits a 2-1/2" hitch receiver like the 12.5K…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Hi Doug! If you were just needing a weight distribution system for the sway control, I would have said the Andersen Weight Distribution Hitch w Sway Control - 6" Drop/Rise - 14K GTW, 1.4K TW #AN53VR could be a good option. However, I have tried…

view full answer...

Answer 7

Hey Kim. The B&W Digital Tongue Weight Scale w/ LED Screen item #BW34KR doesn't have it's own bag but you can use the Big Truck Big RV Accessories Bag item #BTBRV002 to store it. This bag measures 17-3/4" long x 6" wide x…

view full answer...

Answer 8

Hey Doug, it looks like the unloaded tongue weight of your 2024 Rockwood Pro G19BH is right at 425 lbs so by the time the trailer is loaded you'd pretty easily be into the range that the Curt system part #C95MJ is designed to work with so this…

view full answer...

Answer 9

Hi Terry; the BOLT Trailer Hitch Receiver Lock #BL7023582 and #BL7025287 will work with the key fob on your 2025 GMC Sierra 2500. The center cut key that is inside the fob is what you will use to code the locks.

view full answer...

Answer 10

Your 2024 Chevrolet Silverado 3500 will come with a 2-1/2" trailer hitch receiver. If your truck did not come with a reducer for a 2" receiver we do have the B&W #BWRHXA2182 if you need to use your 2" ball mount or hitch mounted…

view full answer...

Answer 11

The B&W Continuum Weight Distribution System part #BW78FR is a great system but so is the Blue Ox SwayPro Weight Distribution System like part #BXW1006. In regards to ease of use, the B&W gets the edge as setting the spring bar tension is…

view full answer...

Answer 12

The BOLT Trailer Hitch Receiver Lock #BL7023582 will fit the center cut key you included in the image for your 2022 GMC Sierra 2500HD.

view full answer...

Can BOLT Locks Be Re-Coded to New Vehicle After Initial Use

Product Page this Question was Asked From

Continue Researching