Determining Towing Capacity for 1999 Dodge Dakota
Updated 07/01/2019 | Published 06/28/2019
Question:
It has a hitch not factory on bumper, the bumper one says 2000lbs is that the towing capacity or the bumper hitch capacity.
asked by: Shawn
Expert Reply:
I wasn't able to track down an online version of the owner's manual for your 1999 Dodge Dakota so unfortunately I can't verify its towing capacity. To accurately determine this number I recommend flipping to the towing section of your manual or even contacting a local Dodge dealer with your VIN.
I will say though that if the hitch on your Dakota lists a 2,000 pound towing capacity this is the limit you will need to follow even if the truck itself is capable of pulling more. To tow a heavier weight (if the truck is able to) you would need to install a different hitch such as the Curt Class III # C13280 that features a 5,000 pound towing weight capacity. This is a frame mounted unit that will line right up to existing holes on the Dakota for a no-drill installation.
I have attached an installation video that you can use for reference.
If your Dakota isn't already equipped with a trailer wiring connector I recommend the Tekonsha T-One # 118329 that will plug into factory ports along the inside of the frame rails at the rear of the truck. This will provide you with a 4-Way connector to connect with and power a trailer's basic signal lights.
I have again attached an installation video that you can check out.
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- For Towing
- Class III
- 500 lbs TW
- 5000 lbs GTW
- 8000 lbs WD GTW
- 2 Inch Hitch
- 800 lbs WD TW
- Concealed Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Search Results: 118329
- Shop: Trailer Wiring
- Shop: Trailer Hitch
- Shop: etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Q&A: Recommended Trailer Hitch for a 2003 Dodge Dakota
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Video: Trailer Wiring Harness Installation - 2001 Dodge Ram Pickup
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class IV - 2"
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Search Results: trailer hitch
- Video: Curt T-Connector Vehicle Wiring Harness Review C56040
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Article: Trailer Wiring Diagrams
- Search Results: trailer wiring
- Video: The Low-Down on the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Search Results: trailer tires and wheels
- Video: Curt Powered Tail Light Converter Installation - 2023 Kia Telluride
- Shop: Suspension Enhancement
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Trailer Hitch and Wiring for 2027 Kia Telluride
- Video: Clean Up Your Trailer Wiring
- Search Results: trailer jack
- Shop: Brake Controller
on Trailer Hitch
