Can Outside of Demco Surge Actuator be Welded to Trailer Frame
Updated 06/11/2019 | Published 06/10/2019
Question:
Want to install your DM72VR actuator, but my frame is welded to outside of the 82543 atwood actuator. Can I weld to outside of actuator without damaging it
asked by: Jackie P
0
Expert Reply:
It's very common for trailer surge actuators like the # DM72VR to be welded to the frame of the trailer tongue. Welding it from the inside or the outside would be totally fine as long as it's done by a professional and the coupler has the needed room to move back and forth to activate the brakes.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Demco Hydraulic Brake Actuator - Drum - Zinc - 2" Ball - 7,000 lbs
- Brake Actuator
- Surge Brake Actuator
- Farm Trailer
- Boat Trailer
- Construction Trailer
- Travel Trailer
- Utility Trailer
- Bolt-On
- 7000 lbs GTW
- 2 Inch Ball Coupler
- 3 Inch Channel Tongue
- Drum Brakes
- No Lockout
- Demco
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Trailer Wiring
- Video: Feature Review Light Guide LED Trailer Tail Light
- Q&A: Do The Optronics # STL72RB And # STL82RCB Use The Same Bulb And What Is The Wattage?
- Video: Curt Single Hook, Coiled Safety Cables with S-Hooks Spec Review
- Video: Comprehensive Review: Durabilt Safety Chain Connectors for 3/8" Chain
- Shop: Demco Hydraulic Brake Actuator - Drum - Zinc - 2" Ball - 7,000 lbs
- Shop: LED Trailer Clearance or Side Marker Light w/ Reflex Reflector - 3 Diodes - White Base - Red Lens
- Shop: Durabilt Safety Chain Connectors for 3/8" Chain - 7,100 lbs - Qty 2
- Shop: Curt Single Hook, Coiled Safety Cables with S-Hooks - 42" Long - 5,000 lbs - Qty 2
- Search Results: oval trailer light
- Search Results: stl72
- Search Results: a11glpb
- Search Results: coupler
- Search Results: mcl31
- Search Results: quick link
- Search Results: stl111
- Q&A: Can Demco 8705001 Hydraulic Disc Brake Actuating Trailer Coupler Be Welded
- Q&A: Replacement Actuator/Coupler to for Trailer with Welded on Drum Brake Actuator
- Q&A: Replacement for Atwood 6,000 lb Hydraulic Actuating Coupler for Drum Brakes
- Q&A: Removing Atwood Actuator to Install Demco DM72VR
- Q&A: Preferred Method For Bolting On A Demco Hydraulic Brake Actuator DM72VR
- Q&A: Solution for Needing Replacement Atwood Master Cylinder 85841
- Shop: LED Trailer License Plate Light - Submersible - 2 Diodes - Round - Clear Lens - Male Plugs
- Shop: Optronics 7-Way Trailer Harness Plug Protector
- Shop: Thinline LED Clearance and Side Marker Light - Submersible - 3 Diodes - Rectangle - Amber