How To Find the Correct Replacement Roof Vent Lid for a Palomino Puma

Question

Question:

2018 palomino puma 30DBSC vent lid

asked by: Pam S

0

Expert Reply:

The best way to find the correct replacement vent lid for your 2018 Palomino Puma XLE Lite 30DBSC would be to remove the screen for the vent assembly and then read me the model number on the sticker. That said, the most popular design is one with a continuous hinge (see photo) with a center metal support bracket and if this is what you have you can use the Vent Cover for Ventline Old-Style Rounded Dome Trailer Roof Vents part # BV0554-03 for smoke or part # BV0554-01 for white.

expert reply by: Conner L

0

click to enlarge

Answer 1

You did indeed see a video showing how to replace the vent lid #BVD0449-A01. I have linked that video for you here as well. IT was one that I made a while back and that is probably where you saw it.

view full answer...

Answer 2

What kind of fan do you currently have? I don't have any kind of database that shows what fans go on Palomino Pop Up campers. The MaxxFan Deluxe Roof Vent w/ 12V Fan item #MA00-07500K you were looking at fits an opening that is 14" wide x…

view full answer...

Answer 3

Tony I really wish I could but that information isn't available online. You'll need to open up your roof and take some measurements and see what you're working with or contact Palomino directly but I have a feeling they're going to…

view full answer...

Answer 4

Hey Abby, the replacement RV door latch we offer that matches what you need the best would be the part #295-000019 that you referenced as fits the cut out size range of 2-1/2" wide x 3-1/2" tall to 3" wide x 4" tall. So you would…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 8

You can use the RV Propane Gas Detector #RS64FR (white) or #RS44FR (black) to replace your current Atwood 31013 propane gas detector. This will also use a 12v, 2-wire installation like your current detector.

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 11

Hello Sam; that is a great question! I reached out to Furrion and you will be able to use the Furrion Chill Cube #FR69TD (white) or #FR49TD (black) with your furnace. However, the remote is not capable of operating the furnace at this time. Also, we…

view full answer...

Answer 12

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

How To Find the Correct Replacement Roof Vent Lid for a Palomino Puma

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching