Troubleshooting Powered Awning That Trips Circuit Breaker When Retracting

Updated 06/03/2019 | Published 05/30/2019

Products Featured in This Question

Replacement Motor for Solera Power RV Awnings Manufactured before 2015

(67)

$214.31

Replacement Drive Head for Solera Power RV Awnings - Plain Style - White

(14)

$332.33

Question:

M awning goes out great but when I bring it in it stops half way in .it pops the breaker I reset the breaker What can I do to fix this trouble

asked by: Michael L

Expert Reply:

If your powered awning trips the breaker on its motor circuit you might have a mechanical issue that is stopping the awning arms from retracting or the breaker on that circuit may not be the correct value. The motors in items like jacks and awnings will draw more power when they see a heavier load or a mechanical obstruction. You'll want to check the operation of the awning manually using the crank; this may help you determine where the problem is. The awning motor should have some indication as to its power draw and the breaker should match the maximum power required by the motor.

If your manual cranking check reveals a mechanical issue at some point you can take note of the awning part numbers and let us know so we can help you with the correct replacements. We offer a Replacement Drive Head Gear Kit # LC353964 for Lippert Components Solera Power Awnings as well as complete replacement Power Awning Plain Drive Heads like # LC266146 and Support Arms like # LC266169.

expert reply by: Adam R