Ventline Fan Motor Replacement for Ventline Roof Vent # V2245-50

Question

Question:

I need a replacement motor for a ventline fan model v2245-50

asked by: Shawn K

0

Expert Reply:

We spoke with my contact at Ventline and she stated that for your V2245-50 exhaust fan you can use the Replacement Fan Motor # BCD0390-00.

expert reply by: Jameson C

0

Derek I.

11/3/2021

Question. I have to phillips exhaust fans. model 2245. Would BCD0390-00 be compatible? Thanks.

Les D.

11/5/2021

@DerekI I called Ventline/Phillips today and they confirmed that you are correct, the Ventline # BCD0390-00 fan will replace the fan in the Phillips # 2245.

Answer 1

I spoke with my contact at Ventline and she stated that for your V2245-50 exhaust fan you can use the Replacement Fan Motor #BCD0390-00. This will work perfectly with your existing fan.

view full answer...

Answer 2

Hey Bill! You can replace your V2262-100 with the Replacement 110-Volt AC Fan Motor for Ventline RV Bathroom Insert Fan w/100 CFM Capacity #BCD0314-00. This will get your vent up and running again. What home project are you most excited to tackle…

view full answer...

Answer 3

According to Ventline, the correct replacement motor for your model V2245-50 bathroom fan is the Replacement Fan Motor for Ventline Exhaust Fan #BCD0390-00.

view full answer...

Answer 4

Hey Dave, I did some cross referencing with your motor model and found the Ventline replacement motor #BCD0390-00 as a confirmed replacement for you. That will be a direct replacement and plug into your fan. What kind of trailer are you replacing…

view full answer...

Answer 5

Yes, we have reached out to Ventline in the past about upgrading a vent with a 50 cfm motor, like part #BCD0388-00, and they have said it is okay to use the 100 cfm version, which is part #BCD0314-00 for your application.

view full answer...

Answer 6

I am having trouble finding information on the Philips Ventline V2245-50, the little bit I can find looks like it is a round vent fan. We have the MaxxFan Dome Plus Roof Vent w/ 12V Fan #MA00-03810W which fits an opening of 6-1/4" diameter. The…

view full answer...

Answer 7

We spoke with our contact at Ventline and she stated that for your V2245-50 exhaust fan you can use the Replacement Fan Motor #BCD0390-00. The correct fan blade would be the part #BVA0312-00.

view full answer...

Answer 8

The correct fan for the motor #BCD0390-00 is going to be the #BCD0311-00, which is a 5-5/8" diameter blade.

view full answer...

Answer 9

The Replacement Fan Motor #BCD0390-00 referenced in your question is the correct motor for your Ventline V2045 model fan. I did also go out to our warehouse to take a look at the motor and measured a length of 1-1/2 inches for the exposed length on…

view full answer...

Answer 10

You can replace the motor in your Ventline V2045 exhaust fan with the Replacement Fan Motor for Ventline Exhaust Fan #BCD0390-00 you were looking at. The fan blade replacement is #BVA0312-00 and then the replacement lens is #VC0133-00. These are the…

view full answer...

Answer 11

The correct replacement motor for your old Phillips fan is the #BCD0390-00. This is the only known replacement so I don't have any information on the ability to upgrade to a higher cfm. The cost can be found on the product page.

view full answer...

Answer 12

The correct replacement motor you need for the Philips/Ventline RV vent part number V2044 is the part #BCD0390-00 that you mentioned. We've confirmed this as the correct fit. The #BCD0314-00 fits the 75 CFM versions of the vent like you have…

view full answer...

Ventline Fan Motor Replacement for Ventline Roof Vent # V2245-50

Product Page this Question was Asked From

Continue Researching