Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Replaces a 110V fan motor for Ventline bathroom insert fans for motor homes and enclosed trailers with 100 CFM capacity (V2262-100 and V2244-100).
Features:
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today we're taking a look at a replacement fan motor for Ventline RV bathroom insert fans. This replaces the fan motor on a Ventline 110 volt roof vent. It fits Ventline bathroom insert fans for RVs, and enclosed trailers with 100 CFM capacity, that's cubic feet per minute when we're talking about the airflow. It installs the exact same way that your old one does.So, please pay attention when removing the old motor, because you will simply reverse the steps to get this new motor installed. The shaft right here, has a diameter of 3/16 of an inch. And the shaft has a length measurement of 1-3/8 inches.
These mounting screws right here, these are separated apart from one another on center, by 1-7/8 inches. It is made from a durable construction. It's got some really nice components on it. Seems like the construction is really well done. It's going to last a long time.
And it does feature the nice two wire design.And it has a two pin connector, or plug on it. This makes connecting the wires quick and easy. Now, if you don't have a connector on your setup, you can simply cut that connector off, strip back the wires for hardwired applications. That's going to do it for today's look at the replacement fan motor for Ventline RV bathroom insert fans.
Replaced the motor and fan blade at our manufactured home with parts from e-trailer. The old parts were from a Phillips V2062 (now Ventline V2062) ceiling fan. So much easier than trying to replace the complete unit. Thanks e trailer.
Great replacement for v2062 which is no longer made
Chose this motor to replace my 50 CFM Ventline exhaust fan that died after 24 years. Motor was shipped quickly and received on time. Installation was quick and easy. The 100 CFM fan moves so much more air. Very happy that I found this on etrailer. If you have to replace your fan motor, or simply want better air circulation, this motor is well worth the cost.
It's VERY powerful compared to the one I replaced, 50cf maybe..? This one will keep a bathroom dry during the whole shower unlike the last. Only reason I knocked off a star is because of the price. I bought from here before and I think it was about half the price last time. Fantastic replacement fan, not much trouble to install either. Great company with fantastic service! Thanks Ryan!
easy to work with and fast shipping.
This product arrived quickly. It works great. If I would ask for anything it would be just slightly longer leads since I am hooking up with wire nuts.
All well, and thanks for having a well organized site. Bath fans need cleaning and motor replaced,
to protect property.
Robert
7/18/2025
Quite well, and not a hard project.
Very sturdy and well made motor. Perfect replacement for defective motor in the bathroom exhaust fan in our 1991 park model. I could not use the quick connector but rather than cutting the wires which would have left them too short, I was able to push in the holding tab on the wire end with an eyeglass screwdriver to release it from the plastic block. I was able to use the original marettes to make the connections. Nice to have the fan working again.
I did some research on this site and found that I could upgrade out smaller 50 cfm fans to 100 cfm with this model. Replaced them and moved air a lot better!
Louder than I'd prefer but it works wel l.
The fan fit and worked good. I did call and asked why it had only black wires from the motor and why not white and black. They explained it was the same if I need to check for rotation. In other words it was the same and the black wires were just as good as the white one. I connected the motor after marking the left side white and when I tried it everything worked really well. I ordered a new 6 1/2 fan blade and it is operating well. I installed it on 30 January 2018.
Replaced my old outdated fan motor and was easy to install. Also, more powerful than the original.
Had gone to home improvement store and found a similar motor. However the fan shaft was smaller and i couldnt use the original fan. Also the original mounting nuts were too big. I took the motor back to the store and found one on this etrailer website. This motor was identical and fit perfectly!
Fit perfectly into the vent in my double wide manufactured home. Delivery was very fast.
Part fit perfectly and works great! Service was excellent and part arrived on time!
Very happy with the product. Install was more difficult due to shorter wires. Both wires are black, old motor had white and black. Not sure but hooking up incorrectly may cause motor to run in reverse.
Pros: more powerful, higher rpm than original motor.
Cons: shorter wire length makes installation more difficult. More power = more noise.
Totally professional group of merchants here. Very professional and helpful. Well packaged & arrived quickly, at an excellent price. I’ll be shopping agin on their excellent online site, if I find myself needing anything else for my pre-manufactured home.
Works great, and was easy to reinstall in place of the old non-working unit.....
staff was very helpful and received the part and only had to make a small modification to it but works great
We bought acreage with a Skyline 1992 manufactured home on it. Neither bath fan worked, and they had an annoying timer that constantly hummed, snapped and clicked. The fans can't simply be removed as a whole unit.
Hubby took them apart, found a manufacturer # (Phillips v2062) and we googled it. Brought us to this website for this specific fan motor. We received them in days. One of the fans had a little plastic tip broke off in the box during shipping, but it didn't affect the product. They looked identical to the original except this motor has two black wires and a connector. Old motor had one black and one white wire, but no connector. Hubby clipped off the connector and labeled the wire that we assumed was white (as compared to the old motor's wiring). Hooked up the motor. Attached the new fan blades, also ordered from here. Put in new simple flip on/off switch instead of clicking timer. And, ta-da, two new working fans!! Great products, great service, will definitely be back if we need anything!
Jenni B.
4/20/2019
Two years later, both fans still going strong!!
As described and fit perfectly
This is the second time I have ordered something from eTrailer and have been satisfied completely. This order was for a bath exhaust fan motor. I received the motor promptly ( 3 work days) and installed it within the hour. I had to modify the wiring due to my unit not having a plug on the original install , but was aware of the issue due to their website guidance. Thanks!
Allan
5/28/2021
Fan is still working well, but definitely makes more noise than we are used to.
This was the only place, in store or online that I could find to replace the bathroom ceiling fan & motor for a manufactured home. This product was the exact match for the vents I had. It was fairly easy to replace just by cutting off the slip connectors to connect to the old wiring.
Thanks George
Phil in Oregon
Phillip O.
9/6/2019
Two thumbs Up !!!!
Exact replacement, shipped quickly, packaged very well; give the transaction a 10 / 10. mike
Since it's almost impossible to find the correct bathroom exhaust fan replacement, we were happy to find the correct motor. Works perfectly.
Jan A.
6/3/2022
Exact replacement fan for our bath in manufactured house. Still runs well a year after install.
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jeff C.
8/7/2018
The motor continues to work very well. No issues to report.