Will Rhino-Rack Locking Fishing Rod Carrier RR574F Fit Roof Rack on 2011 Honda Pilot

Question

Question:

Hello was wondering if this fishing rod holder would fit on a 2011 Honda Pilot Roof Rack . I will attach pictures .

asked by: Lamont

0

Expert Reply:

Yes! Rhino-Rack's Locking Fishing Rod Carrier # RR574F will fit just fine on the elliptical bars of your 2011 Honda Pilot's roof rack thanks to its universal mounting hardware that fits all popular roof rack bar shapes. Once installed the carrier will sit about 3-1/2-inches above the roof rack. Locks are included so there's nothing else to buy to keep your fishing gear secure during transport.

expert reply by: Adam R

0

click to enlarge

Answer 1

Thanks for the photo for clarity. The Rhino-Rack Fishing Rod Carrier - Locking - 8 Fishing Rods #RR574F won't have any issue with the curved crossbars. The 6.5 foot sections of the 13 foot surf rods should work very well for this application.…

view full answer...

Answer 2

So the answer to this really depends on the diameter of the bars on your lumber rack. If they are less than 2 inches then you can use the Rhino-Rack Fishing Rod Carrier - Locking - 8 Fishing Rods #RR574F on your lumber rack. To do so you would need…

view full answer...

Answer 3

In order to determine if the Inno Fishing Rod Carrier is compatible with a vehicle, you simply need to measure the distance between the base of your driver's-side and passenger's-side grab handles. It must be between 35-1/2" - 47"…

view full answer...

Answer 4

The Rhino-Rack's Locking Fishing Rod Carrier #RR574F is great product that will work wonderfully for your application, you can't go wrong purchasing this product. This has universal mounting hardware that fits all popular roof rack bar…

view full answer...

Answer 5

Hi David! The Malone Striper-4 Fishing Rod Carrier #MAL26RR will definitely fit on their AirFlow2 roof rack. This will actually fit just about all round, square, aero, elliptical, and even most factory crossbars. It's very versatile. What kind of…

view full answer...

Answer 6

I'll start out by saying that any time you mount an accessory like the Rhino Rack Fishing Rod Carrier #RR576F on your roof rack, you will need to remove it from the vehicle in order to take it through an automatic car wash to prevent anything…

view full answer...

Answer 7

Hey Dave, the Yakima Rod Carrier part #Y04089 does require that rods longer than 7 feet need to get broken down. This is a cautionary statement due to the flex of rods on that forward clamp. Some rods may have too much flex from the headwinds and…

view full answer...

Answer 8

In order to mount a Yakima TopWater Rooftop Fishing Rod Carrier - Locking - 8 Fishing Poles #Y04088 to a Rhino Rack Pioneer Platform like the #RR42114BF you'll need to use the SmarT-Slot Mounting Kit for Yakima TopWater Rooftop Fishing Pole…

view full answer...

Answer 9

The Rhino-Rack Ski and Fishing Rod Carrier part #RR572 will work with crossbars up to 3-3/4" wide x 7/8" tall with the factory hardware. If you were to substitute the factory hardware that comes with for something longer it would fit taller…

view full answer...

Answer 10

The Yakima ReelDeal #Y04089 is the only rod holder that has the lifter brackets #Y8860037 to lift the carrier to gain extra clearance. You could get the Yakima FatCat #Y03095 which has lifter brackets built in. This is marketed towards ski and…

view full answer...

Answer 11

When using the Yakima ReelDeal Rooftop Fishing Rod Carrier - Locking - 8 Fishing Poles #Y04089 you'll need to disassemble/separate any rods over 7 feet long. However, you won't have any issues with the thickness of the rods and your surf…

view full answer...

Will Rhino-Rack Locking Fishing Rod Carrier RR574F Fit Roof Rack on 2011 Honda Pilot

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching