Compatibility of Rhino Rack Fishing Rod Carrier Installed on 2001 Chrysler PT Cruiser for Surf Rods

Question

Question:

The factory installed roof racks are not straight across but arched. Also the adjustable roof racks when extended follow the curvature of the roof. I will be using this rack to transport 13 foot surf rods that will be broken down into two 6.5 foot sections. Will I have a problem ???????

asked by: Rick K

1

Helpful Expert Reply:

Thanks for the photo for clarity. The Rhino-Rack Fishing Rod Carrier - Locking - 8 Fishing Rods # RR574F won't have any issue with the curved crossbars. The 6.5 foot sections of the 13 foot surf rods should work very well for this application.

With the curve of the roof the reel will be the only issue and you can have that rest on top instead of underneath if desired. Obviously gravity will have an impact on that, so you will need to plan accordingly.

expert reply by: Jason S

1

click to enlarge

Answer 1

So the answer to this really depends on the diameter of the bars on your lumber rack. If they are less than 2 inches then you can use the Rhino-Rack Fishing Rod Carrier - Locking - 8 Fishing Rods #RR574F on your lumber rack. To do so you would need…

view full answer...

Answer 2

Yes! Rhino-Rack's Locking Fishing Rod Carrier #RR574F will fit just fine on the elliptical bars of your 2011 Honda Pilot's roof rack thanks to its universal mounting hardware that fits all popular roof rack bar shapes. Once installed the…

view full answer...

Answer 3

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Answer 4

Hey Michelle! There are definitely a lot of different weight distribution hitch (WDH) options out there. The most important thing is to make sure it is properly rated for the tongue weight of your setup. Looking at the specs for the 2022 Keystone…

view full answer...

Answer 5

Hello Mark, Thanks for writing in. The Rhino-Rack Reconn-Deck Platform Rack #RR34FR34MR is rated for up to 330 lbs of dynamic load capacity and up to 826 lbs of static load capacity. If you're considering a rooftop tent, the static capacity is…

view full answer...

Answer 6

Lithium batteries do require higher voltages to charge than standard batteries which is why the #PD4135K wouldn't work for them. The closest matching converter would be the #PD404KA which will be a bit larger psychically and has a higher amperage…

view full answer...

Answer 7

Hey Grant! Thanks for all the kind words, we're happy to have you! I absolutely recommend picking up the Mounting Panel for Redarc Tow-Pro Trailer Brake Controller Control Knob item #331-TPSI-007. This was designed specifically for those extra…

view full answer...

Answer 8

Hey there Layla! There are a few different forms of weight distribution hitches, but the majority of the systems that have sway control use friction bars, which work similar to brake pads on your vehicle. This works really well, but it can sometimes…

view full answer...

Compatibility of Rhino Rack Fishing Rod Carrier Installed on 2001 Chrysler PT Cruiser for Surf Rods

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching