How to Use the Lockout on the Titan Brake Actuator with Manual Lockout Part # T63FR
Updated 05/07/2019 | Published 05/06/2019
Products Featured in This Question
Question:
I have this on my trailer. This year, I have noticed that the lockout when going in reverse has stopped working and I am needing to use the lockout tool and clamp it on the trailer. Is there a service that needs to be done to this? Currently, while backing up anything but a downhill grade, the trailer brakes actuate.
asked by: Michael
Expert Reply:
In order to engage the reverse lockout on the Titan Brake Actuator with Manual Lockout part # T63FR you will need to insert the lockout tool which should be included, into the channel directly behind the coupler. I have pointed this channel out for you as well as the tool that is needed.
If you don't have this tool then you will need to obtain this from the manufacturer. However, the other option you have is to add an electric lockout that will work when you place the tow vehicle into reverse, the Replacement Solenoid Valve for Titan Brake Actuators with Reverse Lockouts part # T4748800. However, in order to use this you will also need the Curt Trailer Connector Adapter part # C57187 and the Hopkins Wiring Harness with 5-Pole Flat Trailer Connector part # HM37918.
Product Page this Question was Asked From
Dexter Brake Actuator with Manual Lockout - Bolt On - Drum - 2" Ball - 7,500 lbs
- Brake Actuator
- Surge Brake Actuator
- Farm Trailer
- Boat Trailer
- Construction Trailer
- Travel Trailer
- Utility Trailer
- Bolt-On
- 7500 lbs GTW
- 2 Inch Ball Coupler
- 3 Inch Channel Tongue
- Drum Brakes
- Manual Lockout
- Dexter
more information >
Continue Researching
- Search Results: titan model 20 master cylinder
- Search Results: accessories and parts
- Search Results: backup solenoid
- Q&A: Replacement Master Cylinder for a Titan Model 20 Actuator w/ Drum Brakes
- Search Results: master cylinder rebuild kit
- Search Results: brake master cylinder
- Shop: Replacement Master Cylinder Assembly for Dexter Model 10 and Model 20 Brake Actuators - Drum
- Shop: Replacement Master Cylinder for Dexter Model 10 and 20 Actuators - Disc Brakes
- Video: Feature Review Replacement Master Cylinder for Dexter Model 10 and 20 Actuators
- Shop: Replacement Master Cylinder and Push Rod Assembly for Drum Brakes - Model 10 and 20 Actuators
- Shop: Master Cylinder for Titan Model 10 and 20 Actuators - Drum Brakes
- Q&A: How to Tell Difference Between Titan Model 20 Drum and Disc Actuator
- Video: Titan Brake Actuator T4748800 Review
- Video: Review of Dexter Brake Actuator - Solenoid Adapter Fitting - T4750200
- Video: Titan Brake Actuators with Reverse Lockout Replacement Solenoid Valve Installation
- Q&A: Comparing Demco and Titan Disc Brake Actuators with Electric Lockouts
- Q&A: Troubleshooting Surge Brakes Locking up When in Reverse
- Q&A: Replacement Surge Brake Actuator for Atwood 82543
- Q&A: How to Tell if you Have the Titan # DX66FR or the # T4747100
- Shop: Replacement Gasket for Older Orifice Fitting - Dexter Model 10 and Model 20 Brake Actuators
- Shop: Replacement Orifice Connector for Dexter Actuators
- Shop: Replacement Solenoid Valve for Dexter Brake Actuators with Reverse Lockouts
- Video: Master Cylinder for Titan Model 10 and 20 Actuators Review
- Video: Review of Dexter Replacement Master Cylinder Assembly Dexter Model 10 20 Disc - T4749501042
- Search Results: drum brake actuator
- Search Results: electric lockout brake actuator
- Q&A: Bolt Hole Pattern for Titan Aero 7500 Brake Actuator Coupler
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Shop: Trailer Wiring
on Brake Actuator
