Replacement Bearings and Seals for Dexter Axle 10K Axle with Oil Bath
Updated 05/03/2019 | Published 05/02/2019 >
Products Featured in This Question
Question:
What exact bearings, races, seals do I need for a dexter 10,000 lb axle, oil bath? Thanks
asked by: Dwayne
Helpful Expert Reply:
I can give you a few different options but to know the exact bearings, races, and seals you need for an oil bath on your 10K Dexter Axle you will need to take some measurements on your spindle using a digital caliper or by finding the part numbers on these pieces. Attached is a photo to show you where the part numbers are located as well as where you will need to measure on your spindle.
One set of common bearings/seals are inner bearing # 387A (2.250" inner diameter) with race # 382A, outer bearing # 25580 (1.750" inner diameter) with race # 25520, and oil seal # 10-51 which has an inner diameter of 2.875" and an outer diameter of 3.880".
The other popular set of bearings/seals are inner bearing # 395S (2.625" inner diameter) with race # 394A, outer bearing # 387A (2.250" inner diameter) with race # 382A, and oil seal # 10-56 which has an inner diameter of 3.125" and an outer diameter of 4.50".
If you are also needing to replace your oil cap then I have attached a link to our selection of oil caps that you can reference. You just need to measure your hub bore and choose the correct size using the filter.
Product Page this Question was Asked From
Replacement Trailer Wheel Bearing - 395S - Qty 1
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 2.63 Inch I.D.
- Bearing 395S
- Race 394A
- 10000 lbs Axle
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: 7 way junction box
- Search Results: k71~376~00
- Shop: Dexter Trailer Hub Drum Assembly - 9K to 10K - 8 on 6.5 - Oil Bath - Non-ABS Drum - After July 2009
- Shop: Dexter Nev-R-Adjust Electric Trailer Brakes - 12-1/4" - Left/Right Hand Assemblies - 9K to 10K
- Shop: Replacement 10" x 2-1/4" Electric Brake Shoes - 1 Brake Assembly
- Shop: etrailer Electric Trailer Brakes w/ Dust Shields - Self-Adjusting - 12-1/4" - Left/Right - 10K
- Shop: etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector
- Q&A: Replacement Oil Seal For Dexter 10,000 lb Hub From 2006 to Replace National 370150BG
- Shop: Unitized Oil Seal - I.D. 2.875" / O.D. 3.880" for Select 9K-10K Dexter Axles - Qty 1
- Shop: Dexter Trailer Hub and Drum Assembly for 9K to 10K Axles - 8 on 6-1/2 - Oil Bath - Before July 2009
- Q&A: How To Install the Spindle Nut on a 12,000 Pound Dexter Axle
- Q&A: Replacement Magnets for Dexter 12-1/4 Inch x 4 Inch Electric Brake Assemblies
- Q&A: Can a Junction Box be Used for 4-Way Flat Trailer Connector
- Q&A: Replacement Hub Options For a Dexter D1012 With Bearings 387A and 25580
- Q&A: What Gauge Wire Should be Used to Wire Trailer Brakes
- Q&A: Is 14 Gauge Wire Too Small for Electric Trailer Brakes
- Shop: Suspension Enhancement
- Search Results: air lift
- Shop: Fifth Wheel Hitch
- Search Results: airbag
- Search Results: oil seal
- Article: Trailer Wiring Diagrams
- Search Results: trailer hitch
- Shop: Trailer Hitch
- Video: Firestone Ride-Rite Air Bags with Easy Mount Compressor Feature Breakdown
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: trailer tires and wheels
- Shop: Trailer Wiring
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)


