Replacement Bearings and Brake Assemblies For 1998 Dexter 9000lb Axle
Updated 01/14/2021 | Published 01/12/2021
Products Featured in This Question
Question:
I have a brush bandit chipper it’s a 1999 brush bandit 1890, I need axle bearings inner and outer bearings and races for both sides and the grease seals and the hubcaps for both sides. Do you have separate part numbers for all of these parts? And a kit number? Also I need the brake shoes and shoe spring and fastener kit with the magnetic thing. The axle tag says Dexter axle P12 Model SLR SN D 423 4057 Is it a 8k-8 lug 5/8” I do know that the axle is a 8 lug and the diameter of the studs are 5/8” It’s a huge drum for this axle. It has floating tires on it and it weighs 9000 lbs
asked by: Thomas M
Expert Reply:
Thank you for the pictures and information of your axle!
I called Dexter and your Dexter P12 SLR axle with Serial Number D-423-4057 has a 9000lb axle rating, and uses an 8 on 6-1/2 hub and drum assembly with 5/8" studs like you mentioned.
For replacement bearings there is not a kit that has all of the bearings and races but you can purchase them all separately as follows:
Inner Bearing # 387A
Inner Race # 382A
Outer Bearing # 25580
Outer Race # 25520
Oil Seal # 10-51
And Oil Cap Kit # RG04-270
To replace your broken brake assembly you will need Right Side # 23-451, or Left Side # 23-450.This will be the complete new assembly, as the brake shoes are not sold separately.
Lastly if you need to replace your Hub and Drum Assembly you will need the Dexter Trailer Hub and Drum Assembly for 9K to 10K Axles # K08-288-90 which includes the bearings, races, oil seal, and oil cap kit.
Product Page this Question was Asked From
Bearing Kit, 14125A/25580 Bearings, GS-2125DL Seal
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing 14125A and 25580
- Race 25520 and 14276
- 7000 lbs Axle
- etrailer
more information >
Continue Researching
- Search Results: dutton lainson jack
- Search Results: 176692
- Search Results: dutton~lainson trailer jack
- Search Results: dutton~lainson boat trailer parts
- Search Results: wheel covers hubcaps
- Search Results: bearing
- Search Results: bearing kit 68149/lm67048
- Shop: Square 2-Speed Jack - Drop Leg w/ Spring Return - Sidewind - 25-7/8" Lift - 10K
- Shop: etrailer Square Direct Weld Jack - Drop Leg w/ Spring Return - Sidewind - 25-7/8" Lift - 10K
- Shop: Dutton-Lainson Covered Hand Winch - Single Speed - Freewheel - 20' Strap - 1,900 lbs
- Shop: Dutton-Lainson Covered Hand Winch - Single Speed - Freewheel - 20' Strap - 1,500 lbs
- Shop: Replacement Race - L68110
- Shop: Replacement Trailer Hub Bearing - L68149
- Shop: Tie Down Marine Slides for Boat Trailer Bunks - Fits Two 8' Long 2x6 Bunks - Black
- Q&A: Replacement Bearings, Races, and Seal for Lippert 7,000 Pound Axle
- Q&A: How to Determine if the Oil Cap Kit # RG04-270 Would fit Hubs
- Q&A: How to Tell What Number Torflex Axle is on Trailer
- Q&A: Need Wheel Bearing Kit For Dexter 7,000 lb Axle
- Article: Most Popular Wheel Bearings
- Q&A: Bearings and Races for 7,000 Pound Trailer Axle
- Q&A: Will The Dexter Bearing Kit DX58ER Fit A 2022 Alliance Paradigm 340RL With 7,000 lb Dexter Axles?
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Trailer Wiring Diagrams
- Q&A: Does Lippert 12" Electric Brake Assembly ABS Need To Be Programmed Or Paired For Setup?
- Article: Electric Trailer Brakes: How They Work & What to Buy
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: How to Install a Brake Controller on Chevrolet / GMC 1999-2006 Pickups
- Article: Double-Eye Trailer Suspension System Review