Installation of Curt Trailer Hitch on 2018 Lexus RX 350L

Question

Question:

Hi, I am looking at trailer hitch for my 2018 Lexus RX350LNote: not RX350. Do you have an installation video specifically for that particular model? Because this car has a cover on the driver side with very narrow opening. I am wondering just how I will go about cutting or removing the cover and hope to actually see it done with one of your amazing videos. Thanks,

asked by: Biao Z

1

Helpful Expert Reply:

TheCurt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C13394 is a confirmed fit for your 2018 Lexus RX350L and not the RX350 which would use a different hitch # e94AR. We have a video of an install on a 2018 Toyota Highlander RX 350L to help you with all of your install questions. I have attached it for you here.

expert reply by: Jason S

1

Answer 1

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

The Curt Trailer Hitch Receiver #C13394 you were looking at is indeed a confirmed fit for your 2021 Lexus RX 350L. However, if you have the aluminum rim spare, it wouldn't work as this spare is too wide. This hitch will partially block the hands…

view full answer...

Answer 4

I am not aware of any instance where a trailer hitch properly installed on a Toyota Highlander has been broken or bent. As long as the 5000 lb towing capacity/500 lb tongue weight of the #C13394 or the 6000 lb towing/900 lb tongue weight capacity of…

view full answer...

Answer 5

The size of the install bolts that come with the Curt hitch part #C13200 that you referenced are M12-1.25 x 35mm. I looked in our system to see if you bought this hitch from us but I couldn't find you by searching your email address. The hitch…

view full answer...

Answer 6

For the Curt Trailer Hitch Receiver to be mounted to your 2017 Toyota Highlander Limited there are 2 panels that will need to be trimmed. The underbody panel on the non-exhaust side needs to be trimmed to accept the receiver so that it can bolt to…

view full answer...

Answer 7

Hey David, the Camco Reversible RV Outdoor Rug w/ Stakes #CAM42820 that you referenced weighs 9 lbs. This has metal grommets you could use to drive stakes through but I wouldn't necessarily recommend running them through anywhere else on the rug.…

view full answer...

Answer 8

Hey Patrick, I checked out the OEM hitch for your 2024 Subaru Outback and it's trailer wiring bracket looks exactly like the type of bracket that the 7-way of the #ETBC7L is designed to work with so it would work as-is. Are you planning on…

view full answer...

Answer 9

We do have 3 trailer hitches designed to fit your 2019 Toyota Highlander, so I certainly understand your feeling of being a bit overwhelmed. The available hitches can be pretty easily broken down into two categories; hidden and non-hidden. The…

view full answer...

Answer 10

We do have two aftermarket trailer hitch receivers that have a hidden cross tube when installed on your 2018 Toyota Highlander Limited. The options are the Curt Class III Trailer Hitch Receiver #C13394 and the EcoHitch Hidden Trailer Hitch Receiver…

view full answer...

Installation of Curt Trailer Hitch on 2018 Lexus RX 350L

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching