Converting to Oil Bath Hubs on #84 Trailer Spindle
Updated 04/29/2019 | Published 04/25/2019
Products Featured in This Question
Question:
On my trailer that has from what I can tell a #84 spindle, can I convert it to an oil bath system and still use the existing bearings? It has L44649 / L68149 bearings in it.
asked by: Ty
Expert Reply:
The # L44649 and # L68149 bearings that you mentioned do indicate that you have a #84 spindle. The potential issue with converting grease hubs to oil bath is the grease cap, as oil bath hubs use a grease cap that actually threads onto the ends of the hub. Most grease hubs aren't threaded so many times an entirely new hub is needed to make this conversion.
If however your 3,500 pound hubs feature a 1.98" hub bore diameter then you can use the Kodiak XL ProLube Kit # XLPROLUBE1980KIT. This kit includes everything needed to make this conversion without actually swapping out the hubs or your existing bearings. The cap bodies will push into the hub bore and feature threaded ends to which the actual caps will attach.
I have attached a short video demonstration that you can check out as well.
Product Page this Question was Asked From
Kodiak XL ProLube Kit for 3500-lb Axles
- Trailer Bearings Races Seals Caps
- Caps
- Oil Cap
- 1.99 Inch
- 3500 lbs Axle
- Kodiak
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Looking for Replacement Actuator/Coupler for 2007 Karavan Boat Trailer
- Shop: Kodiak XL ProLube Kit for 3500-lb Axles
- Search Results: side marker trailer lights
- Search Results: boat trailer brake lines
- Search Results: curtain track
- Shop: Kodiak 10" Hub-and-Rotor Assembly - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Shop: #84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axle - 1-3/4" Diameter
- Video: Kodiak XL ProLube Kit for 3500-lb Axles Feature Review
- Shop: Dexter Boat Trailer Axle - 89" Long - Galvanized
- Shop: Kodiak Disc Brakes - 12" Hub/Rotor - 6 on 5-1/2 - Dacromet - 5.2K to 6K - Oil
- Search Results: bearing packer
- Search Results: gloves
- Search Results: brake actuator
- Search Results: marine bearing grease
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Q&A: Parts Needed To Add Hydraulic Brakes To 2021 Shorelander Boat Trailer
- Shop: Hydraulic Trailer Brake Kit - Uni-Servo - 12" - Left and Right Hand Assemblies - 5.2K to 7K
- Video: Set up: Kodiak Hydraulic Brake Line Kit on a 2018 Shasta Phoenix Fifth Wheel
- Video: The Low-Down on the Kodiak Disc Brakes
- Video: Ultimate Overview of the Kodiak Hydraulic Brake Line Kit
- Video: Detailed Breakdown of the Demco Flexible Brake Hose
- Video: A Closer Look at the 7-Piece Installation Set for Bearings, Races, and Seals
- Video: Review of the Hydraulic Trailer Brake Kit
- Q&A: Replacement Hub Assembly for T.D.E. 11033
- Q&A: Replacement Hub for Tie Down Engineering 11033
- Q&A: Replacement Idler Hubs for a EZ loader Oil Bath Hub Assembly
- Q&A: Can Regular Grease Trailer Hubs be Converted to Oil Bath Hubs
- Q&A: Recommended Disc Brake Conversion Kit for a 2019 Grand Design Solitude 373FB
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: Trailer Wiring Diagrams
on Accessories and Parts
