How to Install Trailer Hitch on Vehicle with Stripped Weld Nut

Updated 04/22/2019 | Published 04/19/2019

Question:

What should I do if one of the weld nuts are stripped out,thanks for taking question

asked by: Agustin M

Helpful Expert Reply:

If one of the weld nuts on your vehicle is stripped then your only option to install the Curt Class I Trailer Hitch # C11265 is really to obtain a screw tap from a local hardware store so that you can make the weld nut accept a slightly larger bolt. You will then need to get new grade 5 bolts to match your tap.

Before doing this you can also try cleaning the weld nut out with a spray lubricant and wire brush just to make sure it isn't built up corrosion or debris that's preventing the hitch hardware to thread into place. I have attached a video demonstrating this process that you can take a look at as well.

expert reply by: Chris R