Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
This item does not fit your vehicle
1980 Chevrolet Van
These items fit your vehicle
1980 Chevrolet Van
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This hitch gives you a solid foundation for towing and carrying gear. With a 3,500 lbs maximum gross trailer weight and 525 lbs tongue weight, it’s ready for small campers, boats, or utility trailers. The 2" x 2" receiver opening fits most bike racks and cargo carriers, so you can load up the bikes or extra luggage without needing any adapters. It’s rated as a Class III, giving you confidence that it’s built for regular use, not just the occasional haul.
You don’t need a lift or fancy tools to get this hitch on your vehicle. The fully welded receiver bolts straight to the frame using factory holes for a secure fit. There’s no drilling or welding needed—just the included hardware and a torque wrench to snug everything down. The precision robotic welds help everything line up right where it should, making for an easier install in your own driveway.
The heavy-duty powder coated steel resists rust and corrosion for long-term durability. A gloss black powder coat finish is layered over a protective base coat that keeps the hitch looking clean through every season. The round-tube design adds a bit of style under the bumper while keeping things sturdy when towing or hauling gear down rough roads.
If you tow with a weight distribution system, this hitch is built to handle it. It maintains a maximum 4,000 lbs GTW with weight distribution and 525 lbs WD tongue weight. That extra support helps keep your trailer level and stable when hauling heavier loads, giving you more control and smoother handling on the road.
Customer Satisfaction Score:
95% were satisfied with this product
5% of customers were not satisfied
Ratings & Reviews
Exactly what I was hoping for. Needed a 2" receiver since all my devices are 2" (platform and a Yakima bike carrier). I was considering the draw-tite and this Curt receiver. I wanted the most unobtrusive hitch I could get for a RAV4. I didn't want something large and bulky hanging down. While the draw-tite had a bit more weight capacity and was a few dollars less, the Curt certainly satisfies what I wanted. I included a few pics for anyone with the same concern about a bulky hitch on a small vehicle. Very pleased with the overall appearance. I can't speak to whether the draw-tite would have been more evident or not.
Installation was simple and quick, easily a one person job and the instructions were thorough and accurate.
Shipping was QUICK, actually too quick as I ordered late in a Sunday night and was notified early Monday that the hitch had shipped and was scheduled for a Wednesday delivery (day before Thanksgiving). Since I was out of town, I had UPS ahold and deliver on Friday.
Excellent communication ad follow-up from etrailer. Very happy with the price, product and service.
The hitch receiver is great so far! I got it for the Thule Apex 4 bike rack but have not yet used it for that reason. The bike rack was tested by putting it on. It fits and has enough clearance from the spare tire on the back.
The installation on our 2011 Toyota Rav4 went pretty smoothly. It would have been easier if I lowered the tailpipe, but I was able to install without doing so. Installing it with an extra set of hands would have made it much easier, but I was able to install it by myself. I used bricks to elevate the hitch enough to install the bolts. Torquing the bolt to the correct ft-lb was very easy for the bolts on the driver's side of the vehicle, but a little more difficult on the passenger's side.
Overall a good product, and I am looking forward to testing it with the bike rack fully loaded very soon.
Relatively easy to install (although you will need to borrow/buy a torque wrench that can apply 86 foot lbs). Will also need to be able to work underneath your vehicle -- unless you're lucky enough to have access to a lift. My hitch was specifically for my Rav4. Matched perfectly. Instructions pretty straightforward. Need to follow their advice to clean out the bolt holes with a wire brush and some WD40. Makes for a super easy installation.
Ultimately, this receiver fit our 2017 RAV4 XLE AWH Hybrid perfectly, and was easy to install Instructional video was perfect. However, etrailer.com's packaging leaves much to be desired. The first receiver showed up with one side bent at roughly a 15o angle and the paint cracked on the outside of the bend. God knows how much force it took to do this, but the box had a gaping hole and was crushed where the damage occured. Etrailer.com was very good, in that they sent a new receiver even before I got the UPS shipping label to return the damaged one. The second was perfectly straight, but the flanges had cut through the corner edges of the box. A little styrofoam at the ends of the box would go a long ways to protect the receiver. I've read at least one other review where this receiver was bent on delivery. A little more expense on the packaging would cut down on RMA wastage.
Got this to hook up on my 2015 Toyota Rav4 so I could then hook up a hitch bike rack. Works great! I’ve had it for a year now - have traveled from Maryland to Michigan and back with the bikes on the hitch, no problems.
Best price, amazing shipping time (for free), and a quality product. Will definitely recommend to anyone in the market for auto accessories!
Outstanding, in every way! Excellent product design, which fits well onto my wife's 2011 RAV4. As an installation tip: I used an inverted, low-slung, wide-mouth gardening pail to help hold the hitch frame in place on one end as I jimmied the other into place for attachment (see photo). That allowed me to do the installation myself. As with anything of this kind, there were a few struggles -- but not because of any product design flaw. It's just a bit awkward -- not at all unexpected. It came at an excellent time as my wife and I needed to haul all sorts during the prep to sell our house last fall. THANK YOU for a GREAT product! We will be using it often in the future.
I bought and installed the etrailer hitch a year ago. It was the first step in my stealth boat buying plan. The install went very easily. I did have to use a jack to spread the arms about 1/4 inch to get the holes to line up, but after that the install went very smoothly. I've had no problems with the hitch, which i use several times a month to take the boat out.
We purchased a trailer hitch for our 2015 RAV4 to pull a medium trailer with kayaks on it. It worked beyond our expectations! It was a quick bolt on for my husband and teenage son and actually was strong enough to pull a full size 4 wheeler for a short way (I think the hitch was stronger than the car!). Delivery was timely (especially since we were in the midst of the pandemic). We have actually just purchased racks for another car and are buying from etrailer because we were so pleased with their integrity last year.
Received trailer hitch as promised.
Arrived in a well-packed box.
Will be having it installed next week.
Donald
5/9/2021
I use the hitch to transport my bike to go fishing 3 or 4 times per week. It is easy to attach the bike rack and quick to load and enlist the bike. It helps keep me young!
I had a 6 month new, Toyota RAV4 when I purchased and installed receiver and wiring. Being a new vehicle, the mechanical installation was clean and easy. The instructions were clear, the bolts I had to remove came right out with no issue. The wiring was generally straight forward but the instructions provided are completely inadequate. Fortunately, there is a lot of instruction on the install videos. Even with that, it was hard to imagine ripping an almost new vehicle’s interior apart.
The actual process of connecting the wiring kit into the car’s wiring was pretty straight forward, it was getting at the wires that was not explained well. The video made that clear and the procedure was actually rather easy. Just hard to imagine without a video example.
I live in the upper Midwest and winters are cold, snowy and a salty environment for a vehicle’s undercarriage. All the recommendations on the web routed the power wire under the vehicle long the frame. I should note, in a the old days, brake lights did not need to be separately powered but instead used the tail light signals to power the trailer lights. There are a handful of reasons why this has changed and the contemporary systems are a lot more technically complicated than those of the past. The new systems have the disadvantage of needing a separate power and ground (frame) connection (the power wire to the battery at the engine compartment). These new systems have the advantage, however, of reliability.
Once the back portion of the interior was pulled apart (it all went together quite easily with no problems) finding a path for the wiring to the front of the cabin was quite easily done. Much better and easier than routing via the outside.
The only challenge was finding a path through the firewall for the wire to reach the engine compartment and the battery. This was done by using an existing hole near the accelerator (gas) pedal.
In the end, the installation went well and works great at a great price with great support. Details of the wiring install needs to be mbetter documented and I would absolutely NOT run the power wire to the battery, outside the vehicle. Running it inside is much easier and far more secure, even in a warm climate environment. It just needs better explanation.
The only other “thing” was that the trailer wire hides in the spare tire ompartment when not used (most of the time) and is easily pulled out and reaches the trailer connection through the gasket seal on the closed hatch. While this might seem a bit “crude,” has actually turned out to be a pretty good method. The connector sits dry and safe when not in use and is easily routed throw the closed hatch, without any stress or damage to the wire or hatch seal, to the trailer.
It fitted perfect. Easy to install but second person needed to lift the other end. Less than 20 minutes.
Brooke M.
4/29/2025
Always a good idea to get a buddy for some help - and 20 minutes is impressive! Glad it was a smooth install. :)
Bought this for my son's 2017 Toyota RAV4 XLE AWD Hybrid, and now for my 2018 Toyota RAV4 SE AWD Hybrid. Both installations were a breeze. Have yet to determine whether the Tekonsha T-One wiring harness is similarly easy.
Stuart
9/8/2019
The wiring harness worked flawlessly, especially with the hybrid battery being in the back end. Prying the trim out of the way and releasing the wiring clips, however, was a pain. Far harder than the video makes it look. Two people - one to hold the trim out, and one to manipulate the plugs - works far better. The overall setup is great for both my son and me.
Super easy install even without a lift. It was a little tight on one side so I had to get a pry bar and a hand from the neighbor to get it flexed to line up the holes but not a huge deal. Hitch has held up very well being on the vehicle for a year. I keep a bike rack in it continually. No complaints.
Ben B.
10/26/2018
Excellent product as expected.
Easy to purchase. Great service and installation instructions.
I recently installed the Curt 2" trailer on my 2013 Rav4 XLE awd. The quality and shipping was OUTSTANDING. Shipping was quick, took about 4 business days "thank you Christopher N." Installation was about 30 min's "one person installation" using a jack:) The hitch is pretty solid and will more than do the job for my usage of holding Mountain/bmx bikes. ETrailer made this transaction really easy. Will definitely be my go to auto trailer supply shop. Thank you thank you.
Tom W.
6/29/2014
Nicely done :
Cheaper then going to a car shop and very easy to install. I have been using it ever since I installed it. I used it to haul small things and my 4 bikes on my bike rack with my RAV4. Highly recommended hitch. I am extremely satisfied with my purchase. Thanks eTrailer for a quality product at a reasonable price.
Mario C.
2/10/2018
I am happy with the quality and purchase. I have been using it ever since I bought them. Your product has meet all my expectation and it was really easy to install. It also save me about three hundred dollars, if I had some one buy the part and installed it for me. Thanks
Great purchase- Solid product and very easy to install. Would highly recommend.
From date of order to delivery at our doorstep, the service was excellent! We originally ordered this part from a local business and were notified after the hitch was to arrive that it was backordered. We needed it for a trip we were taking and found etrailer online. Ordered the part, it shipped the next day and arrived exactly when it said it would. This experience not only saved our vacation plans, but was a very smooth process. Installation took 30 minutes using the tools that were listed on the easy to follow instruction sheets! The hitch is of solid construction and looks great on our RAV4!
Heather M.
7/20/2018
We bought the etrailer hitch for our Rav4 so we could use our hitch mounted bike rack. The hitch was easy to install and has worked out great! It was designed for our vehicle and I almost forget that the part is after market. Would definitely recommend the Curt Trailer Hitch
The hitch arrived quickly, in just a matter of a couple of days. The written and video instructions were clear and easy to follow. I was able to install the hitch in less than 30 minutes by myself. I used my motorcycle lift to hold it level at the correct height and bolted it in place without ANY problems. The hitch was purchased to mount my bike rack; as you can see, everything worked out without "a hitch"!
David F.
1/15/2019
Absolutely fantastic! Got my niece to buy one too!
I am very happy with my trailer hitch receiver from etrailer. I installed one on my 2011 Toyota rav4 for towing a small teardrop trailer I made during the pandemic. I also purchased a wiring harness to power the trailer lights from etrailer and after some doing have it working well. The cost of doing it myself was a small fraction of having the dealership do the work. The hitch receiver is easy to install as there are pre drilled holes to receive bolts in the frame. The wiring is a bit more complicated but I did it. God bless online videos. I'm happy with the results.
Michael
6/8/2022
Still working great
The hitch receiver came in a sturdy oversized box containing no padding to secure the hitch, possibly explaining the two large holes in the box. There was no immediately visible damage to the hitch but when I measured the distance between the mounting flanges at the forward and rear corresponding edges there was about 1/2 inch difference, suggesting that they were bent presumably during shipping. Fortunately, I was able to mount it to my 2018 RAV4 Hybrid Limited without the need to bend anything. The installation went pretty smoothly except for some fiddling to disconnect the muffler hanger, and I broke two of the plastic fittings that hold a plastic panel in place over the driver side mounting area. I replaced the plastic fittings with some bolts and nuts so no worries. This was a 1-man install job which I accomplished by using a floor jack to raise the hitch into position. Shipping was super fast! I received it the day after I ordered it. All in all I think I will be really happy with this purchase.
Greg
5/26/2022
Serves the purpose for which I purchased this - to hold my bike rack. Still looks like new, no rust or scratches.
I choose etrailer based on great prior reviews, price, and vast selections. While watching a few of their YouTube videos that were very specific and informative in how to install my hitch, I felt confident in their product and customer service quality. I choose standard shipping and it was I received it that week. Very fast! Upon inspection I was surprised how mint condition it was I say that because it there wasn’t really much protection in the box protecting the hitch. I’ve worked for a major shipping company and boxes are thrown around in transport, especially when it comes off the main truck and hits the warehouse conveyor belt system. It’s not malicious, it’s just part of how it’s done. That being said, there wasn’t a mark on it. Great powder coat all around. Came with all well made hardware and directions That were easy to follow. I actually was able to install it myself in less than 30 min. Don’t pay to have someone install it. Just ask a neighbor or a family member to help. All you really need help with or just someone to hold one side up when you lift it in in mine I was even able to just balance it with one of my legs while I have the other side because it wasn’t a huge hitch. Really impressed with it and very happy and would definitely order from them again
Mario
6/16/2021
No rust and performs like day 1
Shipped fast! Perfect fitment to my 2015 rav4 xle and amazing customer service!
Brooke M.
6/12/2025
Looks great, Cortley! Thanks for sharing the photos! What do you tow with the Rav4?
Brooke M.
6/12/2025
The width does not fit the frame rail welded nut location for the 2018:TaAVr hybrid. The edges e has tanks to track to car frame but was too narrow still to have the bolt holes line up with the welded frame nuts barely squeezes past thSaturday l squeezed I now have to buy a new on/brand that has better guarantees on for or have a custom fab shop modify this to get bend it to line up to bolt on or try to weld it on (not suggested to be done in the hybridd) with disappointmenting for the amount of work I had to do to get the exhaust and plastic trim out of the way just to find out it isn't the right size
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Kellie
6/18/2020
Excellent! Ive had no issues pulling my motorcycle and moving with a trailer twice :