Help Finding the Trailer Wiring Harness Plug on a 2019 Hyundai Santa Fe

Updated 04/08/2019 | Published 04/05/2019

Question:

I looked at the picture you provided [for another persons similar question] and cant tell exactly where to look for the connector depicted. I did not see a connector like the one that showed, but it may have been that it had been pulled down and had your harness already attached to it. Please advise.

asked by: Bill H

Expert Reply:

The correct trailer wiring harness for your 2019 Hyundai Santa Fe is the Curt T-Connector Vehicle Wiring Harness part # CU94FR. The port on your Santa Fe that this harness will use is located under the vehicle, behind the rear bumper, on the driver’s side of the vehicle. I am not sure which photo you referenced but have attached one from the instructions for you.

I spoke to my contact at Curt and they stated that this plug will be present even though you do not have the factory tow package. However, if you have a 2019 Hyundai Santa Fe XL then that may be your issue as the above harness is not a fit from the XL models. If you still cannot locate the port then I recommend you take the vehicle to your dealer to have them locate it for you.

expert reply by: Conner L