How To Flat Tow a Raised 1993 Jeep Wrangler YJ With RoadMaster Falcon All Terrain Tow Bar # RM-522
Updated 12/27/2011 | Published 12/24/2011
Question:
I HAVE A 1993 JEEP YJ RAISED AND MY MOTOR HOME HITCH IS LOW I LIKE THE RM-522 HITCH BUT THE 2inch SQUAR WELL HAVE TO MUCH DOWN ANGLE . DO YOU HAVE A BALL MOUNT TYPE SO I CAN EXTEND IT UP ON MY MOTOR HOME.
asked by: AUGUST C
Expert Reply:
Towing a raised 1993 Jeep Wrangler YJ with a motor home-mounted tow bar like the RoadMaster Falcon All Terrain Tow Bar, part # RM-522, which will have an upward or downward slope puts undue strain on the entire towing system.
For that reason, do not tow if the tow bar is not within the Safe Zone. Which means no more than three inches above or below the center of the motor home receiver. Towing a vehicle with a tow bar that is not within the Safe Zone will result in significant wear and tear on the tow bar and brackets, significant wear and tear on the vehicle’s suspension and frame, and the eventual failure of the towing system. I am including a link to the instructions on the # RM-522 tow bar that will describe the Safe Zone on page 2 and I am attaching a picture of the measurements I am describing.
To determine if the tow bar is within the Safe Zone, first, connect the motor home and vehicle on level ground.
Next, measure the distance from the center of the motor home receiver down to the ground. Then, measure the distance from the center of one of the base pins on the Jeep down to the ground. Compare these two measurements. To be within the Safe Zone, they cannot be more than three inches apart if the base pin is above or below the motor home receiver.
I do have some RoadMaster High-Low adapters that can be installed into the motor home receiver and give you the correct rise you will need to tow the raised Jeep correctly. The adapters are designed to be only used with tow bars, not for trailer use. The high-low adapters will come in a range of 2 inch to 10 inch rise or drop. I am including a link to a product page that will show the RoadMaster High-Low adapters available.
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: base plate for tow bar
- Shop: Base Plate for Tow Bar
- Video: Review of CURT Replacement Breakaway Plug 12 Inch Lead RVi Breakaway System - C59NQ
- Search Results: tow bars accessories and parts
- Shop: Roadmaster Crossbar-Style Base Plate Kit - Fixed Arms
- Shop: Roadmaster Falcon 3HD Tow Bar for Blue Ox Base Plates - 10,000 lbs
- Shop: Replacement Breakaway Plug with 12" Lead for RVi Series Breakaway System
- Shop: Blue Ox Base Plate Kit - Fixed Arms
- Shop: Trailer Weld-on Stake Pocket - 7 Gauge
- Shop: Malone 2" Dual Purpose Hitch Receiver
- Shop: Roadmaster Direct-Connect Base Plate Kit - Removable Arms
- Video: An In-Depth Look at the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit
- Shop: Trailer Hitch
- Search Results: trailer hitch
- Q&A: Which is Better Roadmaster or Blue Ox Tow Bar
- Article: Trailer Wiring Diagrams
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Recommended Flat Towing Parts for a 2025 Ford Bronco w/a Standard Bumper and LED Lights
- Video: An In-Depth Look at the Roadmaster Battery Charge Line Kit for Towed Vehicles
- Shop: Trailer Wiring
- Search Results: trailer wiring
- Video: Comparing Portable Flat Tow Braking Systems - Curt RVi and Blue Ox Patriot
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Shop: Suspension Enhancement
- Q&A: What is the Difference Between the Blue Ox Patriot BRK2019 & BRK2022?
- Shop: Vehicle Tow Bar Wiring
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Recommended Flat Towing Set Up for a 2026 Ford Maverick Hybrid
- Search Results: tow bar
- Shop: Brake Controller
on Tow Bar
