Dimension for Installing Fifth Wheel Rail Kit in 2003 Dodge Ram Short Bed

Question

Question:

Yes I have a 2003 Dodge Ram Crew 6-foot bed trying to put in the rails for a fifth wheel hookup what is the distance from the edge of the tailgate to the first rail

asked by: William C

0

Expert Reply:

The dimension you are looking for is 26-5/16 inches when installing the Reese Universal Rail kit part # RP30035-023. This is the recommended distance Reese recommends between the rear rail edge of the kit and the rear edge of your truck's bed. You'll then use the front legs of your fifth wheel hitch to place the front rail.

expert reply by: Jameson C

0

click to enlarge

Answer 1

I reached out to my contact at Lippert and they said that it sounds like you just aren't holding the 4 buttons for the reset long enough. It requires 5 seconds, but many people will count to 5 a little too fast and the system won't reset. He…

view full answer...

Answer 2

Because you have the L-brackets it looks like the installation kit you have is the Reese 5th Wheel Install kit part #RP30035. You will need the additional Reese Mounting Bracket part #RP58023 that Mike mentioned as well as the Replacement Hardware…

view full answer...

Answer 3

We have both custom and semi-custom 5th wheel installation kits for your 2012 Ram 3500 Mega cab diesel with 6-foot bed. All will accept any brand of industry-standard 5th wheel hitch like your Reese 16K slider. For the easiest installation use Curt…

view full answer...

Answer 4

We have actually heard from Lippert about this type of issue and they recommend replacing the 6 amp fuse with a 30 amp fuse. This should resolve the issues you're describing.

view full answer...

Answer 5

Actually, the P3 now has the upgraded axis accelerometer like the P2. The Tekonsha P3 Trailer Brake Controller #90195, will work with both electric over hydraulic brakes on the trailer as well as electric brakes. It has a menu option on the display…

view full answer...

Answer 6

The Reese fifth wheel hitch part #RP30047 is designed to install in the middle slots of a rail that are 20-1/2 inches apart on center left to right and 22 inches apart from one rail to the other. I attached a picture that shows the dimensions of the…

view full answer...

Answer 7

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 10

Hey Jon; I was actually just talking to Furrion about heat options for the Chill Cube yesterday (1/21/2025). At this time, the only way to have heat with this unit is through a furnace on a ducted setup. The Furrion Chill Cube RV AC w/ Air…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

Hey Neil. The 18,000 Btu Furrion Chill Cube RV Air Conditioner item #LC34DX fits a 14-1/4" x 14-1/4" cutout which is pretty standard on RV's. If you meant to write Dometic instead of domestic then yes it'll fit in your existing…

view full answer...

Dimension for Installing Fifth Wheel Rail Kit in 2003 Dodge Ram Short Bed

Continue Researching