Anti-Sway Bar and Axle Stabilization for 2010 Winnebago Sightseer with the W22 Chassis & Gas Engine

Question

Question:

2010 Winnebago Sightseer with the W22 Chassis Camper World is saying I need a 1259-105 front sway bar. Your page for that has a video that says its a rear sway bar. To add to the confusion, Roadmasters site gives me a part number of 1259-107 but says its for Diesel models, which mine is not. Who is right?

asked by: Jay R

0

Expert Reply:

I'm glad you asked as that info is confusing for sure. I reached out to my tech contact at Roadmaster and the only thing available for your gasoline model W22 chassis is the Roadmaster TruTrac Front-Axle Trac Rod for Large Trucks and RVs # RM-TRACW-22 which essentially just holds the front axle in place to prevent jarring and unnecessary shifting. They don't have anything for the rear of the vehicle.

They do have a steering stabilizer to prevent fatigue at the wheel and help you stay where you desire to be in your lane. For that you will want the Roadmaster Reflex Steering Stabilizer with Mounting Brackets for Class A Motor Homes # RM-RBK13-RSSA.

expert reply by: Jason S

0

click to enlarge

Answer 1

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 2

The front trac bar that comes in the Roadmaster Kit #RM-1259-106 that you referenced will do the same job as a steering stabilizer but won't be as effective. For the best of both worlds I recommend going with the front Anti-Sway Bar #RM-1259-105…

view full answer...

Answer 3

While I was unable to confirm the exact dimensions of the Norcold 1200LRIM, I think your current refrigerator to be 63-1/4 inches tall, 32-11/16 inches wide, and 24 inches deep. Please confirm this. The Everchill RV refrigerator with freezer drawer…

view full answer...

Answer 4

For 1/2 inch trailer u-bolts that attach to axle the recommended torque value is between 45 and 70 ft lbs of torque.

view full answer...

Answer 5

There are many variables when installing the Double-Panel On/Off Switch for Dometic Gas / Electric Combination Water Heaters part #AT91230 therefore it is best to match the wire to the terminals using its function, not the color. The reason for this…

view full answer...

Answer 6

Since you don't have the wiring harness on your previous RV water heater you most likely had an all propane powered unit. The Atwood RV Water Heater w/ Heat Exchange - Gas and Electric - Automatic Pilot - 8,800 Btu - 6 Gal #AT96163 is powered by…

view full answer...

Answer 7

Hey Carolyn, the XD versions of the Sprinter 3500 chassis are the dually versions so you would need to make sure the sway bar you have is compatible with dually models. For example the Hellwig #HE77YR is a bar that does work with the dually models…

view full answer...

Answer 8

I can definitely help set you up with everything you will need. Before we get too deep into things, we recommend thoroughly reading your owners manual and confirming towability with the manufacturer before flat towing a Mini Cooper. That said,…

view full answer...

Answer 9

The length of the Camco RV Step Cover part #CAM42935 that you referenced is 21-1/2 inches and fits most standard RV step dimensions.

view full answer...

Anti-Sway Bar and Axle Stabilization for 2010 Winnebago Sightseer with the W22 Chassis & Gas Engine

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching