All You Need to Know About the Camco RV Battery Powered Level Video

Hello Kevin, Thanks for writing in. The main difference between the Power Watchdog Surge Protectors #HU67FR and #HU42VR comes down to the monitoring capability, housing design, and surge protection rating. The #HU67FR is the newer Generation 2 model.…

Hello Jeff, Yes, the etrailer Electric Trailer Jack - A-Frame - 18" Lift - 5,000 lbs #e55ZV would be an excellent replacement for your Lippert Smart Jack. The install will be very straightforward since the tube diameter is the same, and the bolt…

If the hub that was on your trailer axle previously had 8-91A stamped on the back of it your spindle should require inner and outer bearings of #L44649 like you used. The part #8-91-05UC1 SHOULD be an exact replacement. However we need to double…

It sounds like you have free backing braking assemblies on your trailer so a lockout at the trailer coupler is not needed. In order to replace the Atwood Surge Brake Actuator 82541, I recommend using the Titan Leverlock Brake Actuator part…

Hey Bill, yes the Furrion Vision S+ #FR64AD would be a direct replacement for your current Vision S system. None of it is backwards compatible with the standard Vision S system though.

Skid wheels, including the Ultra-Fab Skid Wheels for Class C RVs up to 34' Long #UF48-979012 are not designed as fully weight-bearing entities so they do not have an official weight capacity. They are only meant as a stopgap for occasional use to…

The Titan Aero 6000 does use a slightly different bolt pattern as the Dexter Coupler part #099-175-20 so while it can work as a replacement you'd have to drill new holes or have the new coupler welded on. The brake line fittings are the same…

Hey Adam, thanks for the information. The Dexter Brake Actuator with Manual Lockout item #T63FR is going to be a pretty comparable replacement to your Titan Aero-6000. It works with a 2" hitch ball, fits a 3" wide tongue, and has a 7,500…

For a Four Winns Boat Trailer with Titan Aero 6000 Surge Brake Actuator, I recommend replacement using the Titan Zinc-Plated, Leverlock Brake Actuator part #099-175-20 which is ready to go as is and will be a great fit. The reason I recommend…

For unloaded ride quality the Timbren's aren't my first pick. Instead I would recommend the SumoSprings Solo Custom Helper Springs - Rear Axle #SSR-307-47 which of all of the jounce style kits these have the smoothest unloaded ride quality.…

You're not going to have any problems mixing Dexter and Lippert components on trailer axles over 10k-lbs in the same manner as below 10k-lbs as long as the measurements on the replacement parts are the same- i.e. bearing sizes are the same, etc..…

You can replace the light on the Electric Jack w/ Footplate - A-Frame - 25-1/8" Lift - 3.5K - Black part #EJ-3520-BBX with Replacement Light Board for etrailer Electric Jack part #EJ-3520-LT all you would need to do is remove the jack cover and…