Recommended Trailer Wiring for 2019 Honda CR-V

Question

Question:

Hello. Can you please tell me what trailer wiring I need for my 2019 Honda CR-V. I need a 4-Way. Thank you. Have a hitch.

asked by: Jack F

0

Expert Reply:

For your 2019 Honda CR-V the Tekonsha T-One Vehicle Wiring Harness # 118741 will work perfectly. This is a custom "plug-and-play" harness that features a high amp capacity for the lights and comes with Tekonsha's great reputation for manufacturing durable and reliable electrical products.

To install the harness you simply need to plug it into a factory port located behind the driver's side trim panel (see attached image) and insert the included fuse beneath the driver's-side dash. This will provide you with a 4-Way connector to power your trailer's signal lights.

I have attached an installation video that you can use for reference.

expert reply by: Chris R

0

click to enlarge

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

Other than the higher amperage rating offered by the Tekonsha #118741, there isn't much in the way of differences between it and the Curt #C56370. Both use solid state construction, the Curt uses the SMT which doesn't use through-holes in the…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 6

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 7

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 8

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 11

Hey Erica, thanks for reaching out! Since your 2026 Honda CR-V is a Hybrid we're a bit limited on the hitch options, and you'll need to get one that does require some fascia cutting. For this, I recommend the etrailer Trailer Hitch Receiver…

view full answer...

Answer 12

Hi Deb! There are quite a few hitches available for your 2025 Honda CR-V Hybrid and I have the 2" receiver options (best size for what you are wanting) listed below with their corresponding weights. Curt Trailer Hitch Receiver - Custom Fit -…

view full answer...

Recommended Trailer Wiring for 2019 Honda CR-V

Featured Help Information

Miscellaneous Media

Continue Researching