Could Crank Handle of Lippert Quick Drop Tongue Jack # LC733926 Turn Due to Vibration
Updated 01/25/2019 | Published 01/24/2019
Question:
I have installed the Lippert Quick Tongue Jack without problems. My question is about the position that the handle should be in when towing. It appears to me that if you put the handle in the Stored Position, there is nothing to keep the shaft from rotating with vibration and slowly lowering the base of the jack. If you leave the handle in the Cranking position, there is less chance of it inadvertently lowering the jack. In my case, there is something to keep the handle from easily turning in the cranking position while towing. This appears to be a new product and I dont see any guidance on this aspect of the device.
asked by: John G
Expert Reply:
In either position the handle of the Lippert Quick Drop Tongue Jack # LC733926 would not spin and lower on it's own. There's enough friction in the screw of the jack to prevent vibration from causing it to turn on it's own.
Product Page this Question was Asked From
Lippert Quick Drop Tongue Trailer Jack - A-Frame - Topwind w/ Drive Nut - 14" Lift - 2,000 lbs
- Trailer Jack
- Enclosed Trailer
- Utility Trailer
- A-Frame Jacks
- Topwind Jack
- 1001 - 2000 lbs
- Drill-Powered Jack
- Manual Jack
- 14 Inch Lift
- Bolt-On
- With Round Foot
- Lippert
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Search Results: tongue jack
- Search Results: coupler 2 5/16
- Search Results: a~frame trailer coupler
- Search Results: jack wheel
- Search Results: trailer jack caster wheel
- Search Results: trailer jack wheel
- Shop: etrailer Hydraulic A-Frame Trailer Jack - External Pump - 20" Lift - 7,000 lbs - Bolt On
- Shop: Lippert Quick Drop Tongue Trailer Jack - A-Frame - Topwind w/ Drive Nut - 14" Lift - 2,000 lbs
- Q&A: Is There a Gear Replacement For Lippert Quick Drop Tongue Jack
- Video: Stromberg Carlson Hitching Post Chain and 7-Way Plug Holder Review
- Video: Hands-On with the Lippert Quick Drop Tongue Jack
- Video: Lippert Quick Drop Tongue Jack Manufacturer Review
- Shop: Ram Removable, 6" Poly Caster Assembly for 2" Jack Tube - 1,200 lbs
- Video: Review of Demco A-Frame Trailer Coupler - A Frame Trailer Coupler Jack Hole eZ Latch Raw - DM38UV
- Shop: Dutton-Lainson A-Frame Trailer Jack - Sidewind - 15" Lift - 1,000 lbs
- Shop: Dutton-Lainson A-Frame Boat Trailer Jack w/ Wheel - Sidewind - 15" Lift - 1,000 lbs
- Shop: Removable Wheel for Dutton-Lainson A-Frame Trailer Jack Model 6418
- Shop: Removable 6" Caster for 2-1/4" Trailer Jacks - Steel Caster - 1,200 lbs
- Q&A: Can ProSeries Round, Snap-Ring Swivel Jack, Side-Frame Mount Jack Be Used on a Travel Trailer
- Q&A: Recommendation for a Trailer Jack with Easy to Maneuver Caster Wheel
- Q&A: Will Standard Battery Operated Drill Operate Lippert Quick Drop Tongue Jack
- Q&A: Replacing A Lippert A-Frame Jack For A Side-Mount Swivel Tongue Jack
- Q&A: What is Best Way to Lift Deck Height Trailer to Prevent Dragging
- Q&A: Trailer Jack to Lift Horse Trailer to Change Tire
- Article: Trailer Wiring Diagrams
- Shop: Trailer Hitch
- Video: Firestone Ride-Rite Air Bags with Easy Mount Compressor Feature Breakdown
- Search Results: trailer hitch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Trailer Wiring
on Camper Jacks
