Trailer Hitch Fit for 2019 Hyundai Tucson

Question

Question:

I have a 2019 Tucson - will the Curt Class 3 Trailer Hitch Receiver 13240 still fit it? Thank you,

asked by: Lynn W

0

Expert Reply:

Yes, I checked with Curt and the hitch part # C13240 that you referenced is a confirmed fit for your 2019 Hyundai Tucson. This hitch is really great as it has a 2 inch opening which means it has plenty of towing capacity and accessories made for it and since it has a concealed cross tube it's far less visible than other hitches. I attached an install video for this hitch for you to check out as well.

expert reply by: Jameson C

0

click to enlarge

Answer 1

For your 2015 Subaru Forester I would recommend going with a hidden hitch like the EcoHitch part #306-X7216 as only the hitch opening hangs below the rear bumper and the lower hitch opening is removable which means when not in use it's totally…

view full answer...

Answer 2

Hi Larry! I see you already purchased the Stealth Hitches Hidden Trailer Hitch Receiver w/ Towing Kit - Custom Fit - 2" #SH32TR for your 2024 BMW X5, but I did still want to confirm that this does include all the needed wiring for a 7-way…

view full answer...

Answer 3

Hi James, We installed the Curt Trailer Hitch Receiver part #C94WR on a 2026 Hyundai Tucson and in the video, they take some measurements of the hitch on the vehicle. It looks like from the ground to the top of the inside of the hitch measures about…

view full answer...

Answer 4

No, I am sorry Carey they do not make an adapter for an actuator like the Dexter DX7.5L A-60 item #DX56FR that spins. You'll have to remove your brake line, install it on the actuator, and then reconnect your brake line to get it connected. How…

view full answer...

Answer 5

Hey Scotty, thanks for reaching out! I contact my tech guy at Lippert and this is what he said in regards to your situation: "There are a few things that will affect the hitch height. The first thing is when unhitching from the tow vehicle…

view full answer...

Answer 6

Hey David, The Dexter DX7.5L A-60 Brake Actuator w Electric Lockout #DX56FR accepts brake lines with 3/16" male inverted flare fittings with a 3/8"-24 thread size like the DeeMaxx Hydraulic Brake Line #DE38GR.

view full answer...

Answer 7

Hey Gabe! For a hitch I recommend Curt #C94WR. This hitch fits all models of the 2026 Tucson, including your Limited Hybrid. The receiver sits right up under the bumper with the cross tube completely hidden. See the attached photo. What will you be…

view full answer...

Answer 8

Hello again, Corey! We do have a wiring kit available for your 2026 BMW X5 with the Curt Powered Tail Light Converter w/ 4-Way Flat Trailer Connector and Install Kit #C56190KIT, but the Draw-Tite hitch 76908 does not have one that specifically has to…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 12

Hey Glenn, welcome back! If your Big Tex has 3,500 lb axles, that makes things pretty straightforward since they almost always use a standard 10" x 2-1/4" brake assembly. Based on that, here's what I'd recommend: etrailer Electric…

view full answer...

Trailer Hitch Fit for 2019 Hyundai Tucson

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching