Adding a 7-Way Trailer Connector to 2008 Ford F-150 with Factory 4-Way
Updated 11/05/2018 | Published 11/04/2018 >
Products Featured in This Question
Question:
I have a 2008 f150 with a 4 pin harness. I cant find a harness to add a 7 way harness.
asked by: Josh A
Expert Reply:
Since you already have the 4-way trailer connector on your 2008 Ford F-150 you may only need an adapter, part # 37185. This converts the existing 4-way to a 4- and 7-way connector in one. It plugs into your 4-way and then the other wires need to be connected into the truck's wiring.
Some models of the F-150 already have the wiring for the trailer brake output circuit and the 12 volt power lead ran from under the hood to the end of the driver's side frame rail. If you can find these wires you can use those to make the connections but they're often hard to find even if your truck does have them. We find it easier to use our # ETBC7 kit which includes an adapter just like the # 37185 along with additional wire and circuit breakers to make all the connections yourself.
The black wire on the adapter runs to your truck's battery through an included circuit breaker, the purple wire is connected to your truck's reverse light circuit, the blue wire goes to the brake output wire coming from the brake controller, and the white wire is grounded to the truck's frame. I've linked an install video on a 2013 F-150 for you. It's a universal part so the install is similar.
If you also need a brake controller I recommend the Prodigy P3, part # 90195. It's one of the most reliable controllers we carry.
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Shop: Trailer Hitch
- Video: DIY 2008 Ford F-150 Installation for the Curt Trailer Hitch Receiver
- Shop: B&W Heavy-Duty Trailer Hitch Receiver - Custom Fit - Class V - 2"
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class IV - 2"
- Shop: B&W Heavy-Duty Trailer Hitch Receiver - Custom Fit - Class V - 2"
- Shop: Trailer Wiring
- Shop: Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 7-Way and 4-Pole Flat Connectors
- Shop: Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: trailer hitch
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Article: Trailer Wiring Diagrams
- Video: Curt T-Connector Vehicle Wiring Harness Review C56040
- Search Results: trailer wiring
- Search Results: trailer tires and wheels
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Article: How to Choose the Right Trailer Hitch Class
- Video: The Low-Down on the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Shop: Suspension Enhancement
- Shop: Brake Controller
- Search Results: trailer jack
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Recommended Bike Rack and Dual Hitch Adapter for Carrying E-Bikes While Flat Towing
- Video: Feature Breakdown: Universal Installation Kit for Trailer Brake Controller
- Article: How to Measure for Trailer Hitch Drop
- Shop: Gooseneck Hitch
- Video: Curt Mounting Bracket for 4-Pole Flat Trailer Connector Review

