Will CE Smith 57-1/2" Long 1.8k Axle Work With 4 on 4 Inch Hubs On Harbor Freight Trailer
Updated 07/10/2018 | Published 07/06/2018
Products Featured in This Question
Question:
I see that you also sell this axle with 5 lug hubs. I am replacing a Harbor freight trailer axle that has 4 lug hubs, so I have 12 inch 4 hole tires. Can I put a standard 4x 4 hub on this axle?
asked by: Thomas A
Expert Reply:
Yes, you are able to mount a 4 on 4 inch bolt pattern hub on the CE Smith Trailer Axle # CE33201GA. I recommend the CE Smith Trailer Hub Assembly # CE13109 to pair with this axle.
To ensure this axle will fit on your Harbor Freight trailer, I recommend taking a hub face and spring center measurement of your current axle. There are multiple ways to measure the length of an axle beam, but the hub-face-to-hub-face and spring-center-to-spring-center lengths are the most accurate.
Hub face (A) refers to the length of the axle measured from the base of one wheel stud to the base of the wheel stud on the opposite side of the axle (when hubs are mounted on the beam).
The spring center (B) is the approximate width of your trailer. It is measured from the center of the spring centering hole on one side of the axle to the spring centering hole on the other.
This axle has a hub face length of 57-1/2" and a spring center length of 46-1/2". If your measurements do not match don't hesitate to contact me and I will assist further.
Product Page this Question was Asked From
CE Smith Trailer Axle Beam with Standard Spindles - Galvanized - 57-1/2" Long - 1.8K
- Trailer Axles
- Leaf Spring Suspension
- Marine Grade
- No Hubs
- 1800 lbs
- Spindles Only
- 46-1/2 Inch Spring Center
- 57-1/2 Inch Hub Face
- No Drop or Lift
- CE Smith
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Replacement Exterior Half-Moon Trailer Vent for 3" Diameter Hole - White
- Search Results: 480~12 trailer tires and wheels
- Shop: Kenda 4.80-12 Bias Trailer Tire with 12" Galvanized Wheel - 4 on 4 - Load Range B
- Shop: Kenda 4.80-12 Bias Trailer Tire with 12" White Wheel - 4 on 4 - Load Range B
- Video: Checking Out the Trailer Axle with Idler Hubs
- Video: Review of etrailer Trailer Hubs and Drums - Pre Greased Trailer Hub - AKIHUB-440-2-EZ-2K
- Q&A: Availability of 4 Lug Trailer Hub that is Pre-Greased and Has 1-1/16 inch Inner Bearings
- Q&A: Can Bias Ply Trailer Tires Be Used On Long Trips
- Q&A: Greasing Trailer Axle Spindle Where Zerk Fitting Broke Off
- Q&A: Replacement 12 Inch Wheel and Tire for a Harbor Freight/HaulMaster Trailer
- Q&A: Replacement Hub Assembly Needed for 4,800 lb 1992 Ranger Trail Tandem Axle Trailer
- Q&A: How to Determine Hub Face to Hub Face Dimension for Picking out Replacement Trailer Axle
- Search Results: sealed bearings
- Q&A: Replacement Trailer Hub Options for Trailer with BT8 Spindles
- Article: Trailer Wiring Diagrams
- Shop: Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Shop: Trailer Hitch
- Search Results: trailer hitch
- Search Results: trailer tires and wheels
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Shop: Trailer Wiring
- Video: Measuring To Choose The Right Trailer Axle
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Search Results: trailer wiring
- Shop: Power Mountain Tallboy Off-Road Bottle Jack - 8-1/2" to 37-3/4" Lift - 6 Tons
- Shop: Suspension Enhancement
- Video: etrailer VS Dexter Self Adjusting Brakes Comparison
- Shop: etrailer Anti-Rattle Hitch Collar for 2" Hitch Receivers
- Shop: Brake Controller
on Trailer Axles
