What is the Difference Between the Stromberg Carlson # LG-179015 and Lippert Components # LC276602

Question

Question:

Whats the difference between LC179015 and LC276602 besides $ to replace a VMC940RB.

asked by: Jamie P

1

Helpful Expert Reply:

The Stromberg Carlson # LG-179015 and the Lippert Components # LC276602 replacement gear boxes are actually identical. The price difference is just because they come from different manufacturers who price them separately.

expert reply by: Jon G

1

Answer 1

Some landing gear components can be used interchangeably with those from other brands and/or other jack models. In the case of the gearboxes #LC276602 and #LG-179015 these items happen to be identical and can be interchanged. I recommended the…

view full answer...

Answer 2

Hey Eliseo, thanks for reaching out! Usually when 5th wheel landing gear is making a clicking noise that means either the legs are having issues or the gearbox is having issues and they need to be replaced. Does the clicking noise sounds like…

view full answer...

Answer 3

Hey David, the Redarc Tow-Pro Link Bluetooth Brake Controller #RED57AR that you referenced will fit any vehicle that has a 7-way installed on it including your 2017 Ram 3500 that has a factory brake controller. This will bypass that circuit on your…

view full answer...

Answer 4

Hey Michael, so based on what you mentioned it sounds like you have a standard Lippert/Venture/LCI style landing gear and you have the 5,500 RPM motor. We do have a higher RPM motor that you can replace it with with the part #LC141893 which turns…

view full answer...

Answer 5

Yes, the Lippert Components Heavy Duty Landing Gear Motor part #LC196308 would be a more dependable option than the Lippert Components High Speed Landing Gear Motor part #LC141893 that you have now. This motor has a higher weight capacity (6,500 lbs…

view full answer...

Answer 6

The Dometic RV Water Heater - Gas - Automatic Pilot - 12 Volt - 8,800 Btu - 6 Gal Tank Item AT96121 is the direct replacement for the GC6AA-10E. Unfortunately it is out of stock with no expected restock date. Instead I recommend the Furrion RV…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 10

Thanks for the picture! I checked with Progressive Dynamics the replacement power converter you need for your Parallax Series 7300 Model 7345 is the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers - 45 Amp item #PD4645V.

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

That's a very good question, we tend to be extra cautious and say to use 10 gauge wire because that would be more than enough. When you get into longer trailers that will end up using a lot of wire the heavier gauge wire becomes more necessary.…

view full answer...

What is the Difference Between the Stromberg Carlson # LG-179015 and Lippert Components # LC276602

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching