Will the CE Smith Roller-Style Guide-Ons Fit an EZ Loader Boat Trailer with 4 Inch Tall Frame

Question

Question:

Ok, my ez boat trailer frame is 1,1/2 wide by 4inch inches tall will they fit?

asked by: Nick

0

Expert Reply:

Yes, the CE Smith Roller-Style Guide-Ons part # CE27610 will fit your EZ Loader boat trailer. The brackets work with trailer frames up to 3" wide x 4-1/4" tall so your 1-1/2" wide x 4" tall frame will not be an issue. I have attached a sample install video for you as well.

expert reply by: Conner L

0

Ronald P.

3/22/2020

I noticed most pictures show the horizontal part mounted under frame and on this picture it is shown over the frame. So, does that mean it can be mounted either way and that would give you the option of the frame measurement to lower or raise?

Chris R.

3/23/2020

Yep, the CE Smith Guide-On # CE27610 could be mounted to either the top or bottom of the trailer frame (thus adjusting the actual height of the of guide-on).

Answer 1

Sounds like you are referring to guide on rollers like the CE Smith Roller-Style Guide-Ons for Boat Trailers #CE27610. These mount at the rear of the trailer frame and act as a guide to allow the boat to slide on as easy as possible. I attached a…

view full answer...

Answer 2

The CE Smith Roller-Style Guide-Ons for Boat Trailers #CE27610 measure 17-1/2 inches horizontally. It mounts on 3 inch frames and roughly 3 inches of it is a portion which cannot be adjusted to so you will have approximately 11-1/2 inches that you…

view full answer...

Answer 3

For starters, in order to use the CE Smith Self Centering Keel Roller for Boat Trailers part #CE29505 on your boat trailer you will also need to use the CE Smith Panel Bracket for 12" Boat Trailer Rollers part #CE10305G and the Roller Shaft with…

view full answer...

Answer 4

The CE Smith Keel Roller for Boat Trailers - Self Centering #CE29505 is a replacement roller for a keel roller assembly. This self-centering roller fits a 12" wide bracket with a 5/8" shaft. In order to use this on your boat trailer you…

view full answer...

Answer 5

The #CE27610 CE Smith Roller Guide-Ons for Boat Trailers would be absolutely perfect for your application. The rollers will do a great job of redirecting the bow of your boat when you're trying to load up the boat on the trailer in less than…

view full answer...

Answer 6

I do have an option for you but you are correct about the hardware that comes with the CE Smith Roller-Style Guide-Ons for Boat Trailers part #CE27610 not fitting your I-beam that is 5-1/2" tall and 3-1/2" wide. However, you can still use…

view full answer...

Answer 7

In order to install the CE Smith Keel Roller for Boat Trailers part #CE29505 on a trailer you will first need the Roller Shaft with Pal Nuts for Boat Trailer Rollers part #CE10727A. Then, all you need is a set of mounting brackets such as the CE…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Answer 10

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Will the CE Smith Roller-Style Guide-Ons Fit an EZ Loader Boat Trailer with 4 Inch Tall Frame

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching