Curt Hitch Fit Tips for 2013 Hyundai Sonata with Dual Exhaust

Question

Question:

I see the install for 1 exhaust but not for the turbo version. Can you provide input on this? A video perhaps? It appears that the Draw Tight replaces the rear exhaust hanger. Is this on both sides? Also, do you get the same flexinch from the Draw Tight as you do with the Curt if you do not utilize the recommended strap? Lastly, the recommendation is to purchase the Draw Tight. Why?

asked by: Timothy S

0

Expert Reply:

We do not have install videos for trailer hitches on a 2013 Hyundai Sonata with dual exhaust, but from previous customers we do know that the exhaust will need to be dropped to complete the install.

We had a customer write a lengthy review on installing the Curt Hitch part # C11025 on a similar dual exhaust Sonata which I attached for you to check out.

expert reply by: Jameson C

0

click to enlarge

Answer 1

The hitch won't play a role in your tongue weight, but the bike rack will. The only hitches available for your 2013 Sonata are Class I with the 1-1/4" receiver like the Curt #C11025. The #C13315 you were looking at is designed for a Mazda…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 5

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 6

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 7

Hey Claudia, I checked with Curt just now and confirmed that their hitch part #C64DR does fit all models of the 2026 Toyota Corolla Cross which includes the hybrid models so it would work great for you. We also had customers with similar hybrid…

view full answer...

Answer 8

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Answer 9

Hey Michael, congrats on the new SUV. The EcoHitch item #EH87CR does not require you to remove the rear bumper assembly when installing. It does require some slight fascia trimming though. You'll have to remove a 2-3/4” deep and 4-1/2” wide…

view full answer...

Answer 10

Hey George, for your 2026 Toyota RAV4 Hybrid we have the Curt hitch part #C34FR62ZY as a confirmed fit but it's on a little bit of a backorder at the moment which is why you don't see any hitch options in our fitguide. The hitches from…

view full answer...

Answer 11

Hey Doug, I checked with Curt and their hitch part #C58VV is a confirmed for all models of the 2026 Lexus RZ350e including the electric model so it would work great for you. Do you have a bike rack already? What kind of bikes do you have?

view full answer...

Answer 12

Hey Bryan, congrats on your new SUV. As of (05/13/26) the Curt Hitch item #C82RJ and the Curt 4-Way connector item #C34MJ are the only parts we know of that are going to be coming out for the new 2027 Kia Tellurides. It's super early in the year…

view full answer...

Curt Hitch Fit Tips for 2013 Hyundai Sonata with Dual Exhaust

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching