Landing Gear Not Working on NUWA 2000 Snowbird 5th Wheel Trailer

Updated 09/04/2018 | Published 09/03/2018

Products Featured in This Question

Landing Gear Set - 36-1/2" Lift - 8,000 lbs

(749)

$312.35

Replacement Switch for Stromberg Carlson Electric Landing Gear

(66)

$66.08

Replacement Crank Handle for etrailer and Ram 5th Wheel Landing Gear

(57)

$25.32

Question:

We cannot get our landing gear to work at all, we think we raised it too far. Model SE-102

asked by: Karina D

Expert Reply:

If the landing gear is electrically operated and the motor makes noise but the legs do not move then it could just be that the battery does not have enough charge to run the landing gear. You can have the battery tested at an auto parts store. If the battery is fine and the motor makes no noise then you may just need to replace the switch.

If you did raise the jacks too high then it could have damaged the threads on the screw and nut which would mean that you would need to replace the system with a new one such as # RVLG-8000. The handle for this system is # RVLG-HDL. Or you could add a motor using # LC142178 and a switch such as # LG-145236.

expert reply by: Michael H