Will the Curt Trailer Hitch # C13382 Fit a 2019 Subaru Crosstrek

Question

Question:

Will fit a 2019 Subaru Costreck? Regards

asked by: Dave Z

1

Helpful Expert Reply:

Yes, the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C13382 is a confirmed fit for your 2019 Subaru Crosstrek. I've attached installation instructions as well as an installation video on your model year to assist.

If you let me know what you will be using the trailer hitch for I can make additional recommendations if necessary.

expert reply by: Jon G

1

Answer 1

We have to recommend using the flange since that's what Curt recommends. My guess is that the the carriage bolt isn't going all the way through the spacer block so you might try rotating the bolt to see if it can seat all the way through it.…

view full answer...

Answer 2

It is true that we looked into if the 2023 Subaru Crosstrek was different from the 2022 and we found the model was unchanged so the Curt hitch part #C13382 will fit and work great. We are in the process of updating our fits so it will be listed soon.…

view full answer...

Answer 3

The install of the Curt hitch part #C13382 on a 2018 Subaru Crosstrek does not require drilling but it does required you to enlarge the access hole that you sent us a picture of. I attached a picture of the step in the install instructions that…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 8

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 9

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 10

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Will the Curt Trailer Hitch # C13382 Fit a 2019 Subaru Crosstrek

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching