Bearings and Seal Recommendation for Dexter 3,000 lb Axle

Published 08/16/2018

Products Featured in This Question

Dexter Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2

(913)

$76.93

Cotter Pin - 1/8" Thick x 1-3/4" Long

(884)

$1.44

Replacement EZ Lube Drive-In Grease Cap - 1.986" OD - Qty 1

(111)

$8.46

Grease Seal - Double Lip - I.D. 1.719" / O.D. 2.565" for 3.5K Axles with #84 Spindles

(2911)

$9.44

Dexter Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3,000 lbs

(1722)

$265.83

Replacement Race L44610 for Bearings L44643 and L44649 - Qty 1

(1312)

$5.25

Replacement Trailer Wheel Bearing - L44649 - Qty 1

(2211)

$24.57

Replacement Race LM67010 for Bearing LM67048 - Qty 1

(1312)

$5.14

Replacement Trailer Wheel Bearing - LM67048 - Qty 1

(2211)

$11.32

Question:

Hi I need wheel bearings, seals, And eventually breaks For a 99 Coleman Fleetwood popup trailer Have attached a picture of the axle stamp maybe that will help any info would be great

asked by: Tom L

Expert Reply:

Thanks for the picture of the tag on your Dexter trailer axle. From that I can tell you have a 3,000 lb Dexter axle.

There isn't a kit available, but I was able to find each of the components you need, which are available individually. You will need bearing # LM67048 and matching race # LM67010, along with bearing # L44649 and matching race # L44610.

For a grease seal you need # 58846, along with grease cap # 21-41-1 and cotter pin # 165649.

For replacement brake assemblies you'd then want the part # K23-472-473-00 for both.