Written Instructions Needed for Tekonsha or Curt Wiring Harness for a 2012 Honda Pilot

Question

Question:

Printed instruction to hook up 2012 pilot trailer wire harness

asked by: Joseph S

0

Expert Reply:

We do have a few different connectors for your 2012 Honda Pilot including the following:

T-Connector # C56170 for a 4-Way
T-One # 118558 for a 4-Way
T-One # 118265 for a 7-Way

I am not sure which one you are interested in or own but all of the written instructions have been linked to this page as well as review videos for you to check out.

expert reply by: Jon G

0

Answer 1

The Curt Custom Fit Vehicle Wiring, part #C56170 is designed for your 2012 Honda Pilot if it is equipped with a factory tow package. If you do not have a tow package on your Pilot, this harness will not work for you. If you do not have a factory tow…

view full answer...

Answer 2

If the connector is present on your 2015 Honda Pilot it will be behind the access door in the rear cargo area of your vehicle that you already checked. It can be somewhat difficult to find but if you dig around you should eventually be able to find…

view full answer...

Answer 3

If your 2013 Honda Pilot has the factory tow package you will find a connection point for the 4-way harness, like the Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector #C56170, which you referenced,…

view full answer...

Answer 4

I can help you with a wiring harness for your 2015 Honda Pilot. If you would like a 4way end the Curt #C56170 will work for your Honda Pilot, if you instead need a 7way for your trailer you will want the Tow Ready #118265. Your local mechanic was…

view full answer...

Answer 5

We have the best luck with the Tekonsha brand trailer wiring harnesses so the part #118558 which is a confirmed fit for your 2013 Honda Pilot would be your best option.

view full answer...

Answer 6

There is a 7-way connector for your 2012 Honda Pilot though the Curt harness you referenced will not work with your vehicle. Since you said you currently have the 4-flat, I assume your '12 Pilot has the factory tow package so you will simply need…

view full answer...

Answer 7

Yes you do need the converter module and relays in the T-One Vehicle Wiring Harness for Factory Tow Package - 7-Way Trailer Connector part #118265. The converter module will connect in the rear cargo area of the Honda Pilot to match up your…

view full answer...

Answer 8

We definitely have what you need to get a 7 Way installed on the 2015 Honda Pilot you are working on. However, the correct pieces will depend on if the Pilot has the factory towing package or not so I did include both options, just in case. I…

view full answer...

Answer 9

Hey Mike, the 7-way kit part #118265 does fit your 2014 Honda Pilot to provide it with a functional 7-way but it does not come with the brake controller install port you'd need for a brake controller. So you can hardwire in a brake controller or…

view full answer...

Answer 10

Yes, Tekonsha makes a wiring harness that will plug into the same connection your #118558 currently uses. What you need is the T-One Vehicle Wiring Harness for Factory Tow Package - 7-Way Trailer Connector #118265.

view full answer...

Answer 11

If the trailer you wish to tow has a 7-way connector, the wiring harness I recommend is part #118265. If you just need a 4-way trailer connector on your 2014 Pilot, the wiring harness you need is part #118558.

view full answer...

Answer 12

We have great wiring harness options for your 2012 Honda Pilot. If your trailer has a 4-Way flat trailer connector, you will want the Tow Ready T-One Vehicle Wiring Harness #118558. This wiring harness for your Pilot will not require any cutting or…

view full answer...

Written Instructions Needed for Tekonsha or Curt Wiring Harness for a 2012 Honda Pilot

Products Featured in This Question

Featured Help Information

Miscellaneous Media

Continue Researching