Can Ultra-Fab Skid Wheels for Class C RVs up to 34' Long # UF48-979012 Bolt On

Question

Question:

Just broke both 4” ultra fab wheels on 31’ 11” sunseeker and it seems I should have 5”. Present set were bolted onto hitch with .long bolts. Can 48979012 be bolted on also? Thanks

asked by: Richard G

0

Expert Reply:

To install the Ultra-Fab Skid Wheels for Class C RVs up to 34' Long # UF48-979012 that you referenced you have to weld on the mounting bracket and then bolt the wheel base to the bracket. You cannot bolt the kit directly to your trailer.

expert reply by: Jameson C

0

Answer 1

I attached a picture that has all the dimensions you are looking for in inches instead of millimeters.

view full answer...

Answer 2

From the sounds of your situation the Ultra-Fab Skid Wheels #UF48-979014 seem to be a great solution. Sure beats damaging your driveway. These are designed to attach to 2-1/2 inch square hitch tube on the motorhome. If you don't have this you can…

view full answer...

Answer 3

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 4

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 5

Hey Michael, you will want to go with a set of skid wheels for your motorhome like the Ultra Fab #UF48-979012 which will prevent the dragging. These attach to the frame and roll instead of dragging. Where are you dragging the most?

view full answer...

Answer 6

Skid wheels, including the Ultra-Fab Skid Wheels for Class C RVs up to 34' Long #UF48-979012 are not designed as fully weight-bearing entities so they do not have an official weight capacity. They are only meant as a stopgap for occasional use to…

view full answer...

Answer 7

I went out to our warehouse and pulled the Ultra-Fab Skid Wheels for Class C RVs part #UF48-979012 for you. The dimensions of the following components are as follows: The metal mounting brackets are 8-1/2" long X 4-1/2" wide. The two…

view full answer...

Answer 8

The best skid wheels for your 31 foot Forest River Forester are going to be the Ultra-Fab Skid Wheels #UF48-979012. The 5" diameter wheels are bolted to brackets which are welded onto your RV's frame. Please keep in mind skid wheels are only…

view full answer...

Answer 9

Hey Mike, for that heavy and long of an RV the skid wheels you'd need are the Ultra Fab part #UF48-979012 which can swivel too so they will do a great job preventing your trailer from dragging.

view full answer...

Answer 10

Hey, Nicholas! First I'd like to say that you helped me learn something new today. I look up your team and watched the promo video on your universities website. Look like a lot of fun! I watch Formula 1 with my dad from time to time but…

view full answer...

Answer 11

You could mount some skid wheels to the frame by your stabilizers to have them hit first and protect the stabilizers and the rest of the undercarriage from scraping when coming out of a steep incline/decline. I recommend ones like the Ultra-Fab Skid…

view full answer...

Can Ultra-Fab Skid Wheels for Class C RVs up to 34' Long # UF48-979012 Bolt On

Product Page this Question was Asked From

Continue Researching