Ultra Fab Skid Wheel UF48-979012 Dimensions

Question

Question:

Could you please provide the same part list / diagram sizes for part# uf-48-979012 as shown only in inches. Please include mount hardware. Thanks

asked by: John T

1

Helpful Expert Reply:

I attached a picture that has all the dimensions you are looking for in inches instead of millimeters.

expert reply by: Jameson C

1

click to enlarge

Answer 1

The best skid wheels for your 31 foot Forest River Forester are going to be the Ultra-Fab Skid Wheels #UF48-979012. The 5" diameter wheels are bolted to brackets which are welded onto your RV's frame. Please keep in mind skid wheels are only…

view full answer...

Answer 2

I went out to our warehouse and pulled the Ultra-Fab Skid Wheels for Class C RVs part #UF48-979012 for you. The dimensions of the following components are as follows: The metal mounting brackets are 8-1/2" long X 4-1/2" wide. The two…

view full answer...

Answer 3

You could mount some skid wheels to the frame by your stabilizers to have them hit first and protect the stabilizers and the rest of the undercarriage from scraping when coming out of a steep incline/decline. I recommend ones like the Ultra-Fab Skid…

view full answer...

Answer 4

A typical RV entry door gas strut ranges from 10-20lbs in pressure. We carry both a 10lbs #372-5300-10 and 20lbs #372-5300-20 that you can use. Really it just comes down to preference and the climate. If you're in a windy climate going heavier…

view full answer...

Answer 5

From the sounds of your situation the Ultra-Fab Skid Wheels #UF48-979014 seem to be a great solution. Sure beats damaging your driveway. These are designed to attach to 2-1/2 inch square hitch tube on the motorhome. If you don't have this you can…

view full answer...

Answer 6

To install the Ultra-Fab Skid Wheels for Class C RVs up to 34' Long #UF48-979012 that you referenced you have to weld on the mounting bracket and then bolt the wheel base to the bracket. You cannot bolt the kit directly to your trailer.

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 10

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 11

We have lift kits for trailer that easily add 2 inches to the height of the trailer. For that you'd want the part #RR23QX and you'd be set. I attached a picture that shows how it installs to give you an idea. This would be the easiest…

view full answer...

Answer 12

Hey Michael, you will want to go with a set of skid wheels for your motorhome like the Ultra Fab #UF48-979012 which will prevent the dragging. These attach to the frame and roll instead of dragging. Where are you dragging the most?

view full answer...

Ultra Fab Skid Wheel UF48-979012 Dimensions

Product Page this Question was Asked From

Continue Researching