Measurements of Curt Hitch C13014 and Best Hitches for 1999 Ford F-250 with Deep Drop Bumper

Question

Question:

I need a few dimensions of the C13014 receiver. I noted them in the photos. trying to fit it to a 1999 F-250 with an aftermarket steel bumper that is in between a deep and standard bumper.

asked by: Garrett M

0

Expert Reply:

I have included a picture of Curt trailer hitch # C13014 with the measurements you have requested. If this hitch does not drop down far enough we do have some options for your 1999 Ford F-250 that normally fit models with the deep drop bumper:

Class III Draw-Tite hitch # 37133
Class V Curt hitch # C15316
Class V Draw-Tite hitch # DT45514

expert reply by: Michael H

0

click to enlarge

Answer 1

34 inch wide frames are pretty common for cab and chassis vehicles. For a hitch that fits that dimension we have the #C15800 which sits down 7 inches from where it attaches to the truck frame. This would be the best option we have.

view full answer...

Answer 2

I would be happy to help! The Curt Trailer Hitch Receiver #C15316 you were looking at measures 9" from the top of the mounting flange to the top of the crosstube, so it will stick down 2" lower than the existing hitch on your 1999 Ford…

view full answer...

Answer 3

Your Curt #C15316 is for the deep drop bumper and has a measurement of just over 9 inches according to my contact at Curt. He said the #C15410 is 5.32 inches from the frame to the top of the crosstube and they don't have anything in between those…

view full answer...

Answer 4

The Curt hitch you mentioned is more of a multi fit hitch and would not be the best choice for your truck, but we do have a couple options. The closest fitting, but still probably not close enough would be the #37133 which has it's hitch opening…

view full answer...

Answer 5

I checked with Curt and they sent me the following dimensions based on your picture for the #C15410. Red line measurement 10.55” Yellow Line measurement 5.32” Green Line measurement is 7.5”

view full answer...

Answer 6

I had our warehouse measure the Draw-Tite Trailer Hitch Receiver DT45514 for you and the measurements are as follows: From the top of the mounting flange to the top of the receiver: 8" From the front of the mounting flange to the front of the…

view full answer...

Answer 7

Hello Doug, thanks for reaching out. In regards to the B&W Heavy-Duty Trailer Hitch Receiver #BWHDRH25198 the distance from the mounting surface to the top of the receiver tube is 7.9". Take a look at the picture I included. The #BWHDRH25198…

view full answer...

Answer 8

I have attached a photo of the B&W Heavy-Duty Trailer Hitch Receiver, part #BWHDRH25198 you asked about. I have noted the mounting holes on the photo you can check out. The distance center-to-center from the front mounting hole to the second is…

view full answer...

Answer 9

The Curt #C14048 measures 16-1/16 inches from the back to the center of the 3 front holes. Those front holes are all 1-1/2 inches on center so you technically could use the 14.565 inch measurement. There is not one that is closer to 15 inches in…

view full answer...

Answer 10

I spoke with B&W about the B&W Heavy-Duty Trailer Hitch Receiver part #BWHDRH25198 and they informed me that the distance between the mounting holes left to right is 37-1/8".

view full answer...

Answer 11

The only custom hitch we can confirm will fit your 1999 Ford Super Duty with the Ranch Hand Legend rear bumper is the Curt #C14355. This is a Class IV hitch instead of V with a 10,000 lb max gross trailer weight. It looks like even if you have the…

view full answer...

Answer 12

For a trailer hitch that fits your 2002 Ford F-350 with the deep drop bumper Curt hitch #C15316 is the best option. It measures 11-1/4 from the rear-most attachment point on the truck to the face of the receiver. That should tell you if it will stick…

view full answer...

Measurements of Curt Hitch C13014 and Best Hitches for 1999 Ford F-250 with Deep Drop Bumper

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching