Dimensions Of Draw-Tite Trailer Hitch Receiver DT45514 For 1999 Ford F-250 W/ Deep Drop Bumper

Updated 06/17/2021 | Published 06/11/2021

Question:

Follow up question. Can you provide the same four measurements asked by Garrett M concerning the Curt C13014 to the DT45514. The question found on your web site was answered by Michael H. He also so suggested three other hitches in his answer. I need 4 measurements for the Draw-Tite DT45514. I have a 1999 F-350 super duty with a 7 inch deep bumper. 9 inch is to much...

asked by: Martin K

Expert Reply:

I had our warehouse measure the Draw-Tite Trailer Hitch Receiver DT45514 for you and the measurements are as follows:

From the top of the mounting flange to the top of the receiver: 8"
From the front of the mounting flange to the front of the crosstube: 3"
From the front of the mounting flange to the front of the receiver: 6 3/4"
From front of the receiver to the front of the crosstube: 3 3/4"

I included a diagram showing these measurements and a link to the written instructions of the DT54414 for you to take a look at.

expert reply by: Samuel C