Replacement Air Conditioner Shroud for Coleman Mach 3

Question

Question:

I have a coleman RV rooftop air conditioner. SN 059922700 Model # 8333-8766. Do you have a replacement shroud for this?

asked by: Cheryl

0

Expert Reply:

The correct replacement air conditioner shroud you need for your Coleman Mach 3 8333-8766 is the MaxxAir TuffMaxx Replacement Shroud part # MA00-325001. This shroud will be an exact replacement and comes with stainless steel mounting hardware. It is also made right here in the U.S.A.

expert reply by: Conner L

0

Answer 1

Hello Antonio. The Advent Air Diagnostic Kit for RV Air Conditioners #ACTF will only work with the Advent Air AC units and the Dometic Brisk Air I and II model AC units. It is not compatible with the Coleman Mach AC Units.

view full answer...

Answer 2

If you're just wanting to replace the rooftop unit and retain the use of your air distribution box and thermostat then you'll want to first remove the cover for your air distribution box and look up into the wiring and see if you have a 6-pin…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

Hello Sam; that is a great question! I reached out to Furrion and you will be able to use the Furrion Chill Cube #FR69TD (white) or #FR49TD (black) with your furnace. However, the remote is not capable of operating the furnace at this time. Also, we…

view full answer...

Answer 7

Hey Jon; I was actually just talking to Furrion about heat options for the Chill Cube yesterday (1/21/2025). At this time, the only way to have heat with this unit is through a furnace on a ducted setup. The Furrion Chill Cube RV AC w/ Air…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 10

Hey Neil. The 18,000 Btu Furrion Chill Cube RV Air Conditioner item #LC34DX fits a 14-1/4" x 14-1/4" cutout which is pretty standard on RV's. If you meant to write Dometic instead of domestic then yes it'll fit in your existing…

view full answer...

Answer 11

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 12

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Replacement Air Conditioner Shroud for Coleman Mach 3

Featured Help Information

Miscellaneous Media

Continue Researching