Over-Under Conversion Kit for 3" Dexter Axle
Updated 07/11/2018 | Published 07/10/2018 >
Products Featured in This Question
Question:
I have a trailer that is homemade with manufactured home axles with electric brakes. At this point I have looked everywhere and cannot find any break replacement parts to fix the current axles. I found axles on your website that fit my current axles but my axles are overslung and your axles are underslung. Can I take your underslung axles and put them below my leaf springs in an overslung configuration with an adapter of some sort, or is there another solution?
asked by: Ryan
Expert Reply:
You can absolutely use the Dexter Trailer Axle w/ Electric Brakes # 8327820-EB and put them below your leaf springs. What you need to do is use the Trailer Springs Over-Under Conversion Kit # K71-385-00, so long as you have double-eye leaf springs; which will then be on top of the axle like you wanted.
Product Page this Question was Asked From
Dexter Trailer Axle w/ Electric Brakes - E-Z Lube - 6 on 5-1/2 Bolt Pattern - 89" - 5,200 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Grade
- Electric Brakes
- 5200 lbs
- 6 on 5-1/2 Inch
- 74 Inch Spring Center
- 89 Inch Hub Face
- No Drop or Lift
- Dexter
more information >
Continue Researching
- Video: Checking Out the Trailer Hub and Drum Assembly
- Video: Ultimate Overview of the Grease Seals 10-36 (pair)
- Video: Grease Seals 10-36 (pair) Feature Review
- Video: The Low-Down on the Easy Grease Trailer Hub and Drum Assembly for 5.2K & 6K Axles
- Shop: Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb Axles - 12" - 6 on 5-1/2 - Pre-Greased
- Shop: Dexter Trailer Axle w/ Electric Brakes - E-Z Lube - 6 on 5-1/2 Bolt Pattern - 89" - 5,200 lbs
- Shop: Trailer Axle Beam with Easy Grease Spindles - 86-1/2" Long - 5,200 lbs
- Shop: #42 Spindle for 5,200-lb to 7,000-lb Trailer Axles - 2-1/4" Diameter
- Shop: Dexter Trailer Hub and Drum Assembly - 5,200-lb E-Z Lube Axles - 12" - 6 on 5-1/2
- Search Results: trailer spindles
- Shop: #42 E-Z Lube Spindle w/ Flange for 5.2K to 7K Trailer Axles - 2-1/4" Diameter
- Shop: Easy Grease Trailer Hub and Drum Assembly for 5.2K & 6K Axles - 12" - 6 on 5-1/2 - Pre-Greased
- Video: All About the Replacement Bolts for Equal-i-zer Weight Distribution Head
- Search Results: dexter trailer hubs and drums
- Search Results: b12e~22
- Q&A: Replacement Axles, Leaf Springs, and Equalizers for 2010 Keystone Cougar 26BHSWE
- Q&A: Compatibility Of Dexter 6,000LB Hub And Drum Assemblies On etrailer AxleTek 7,000LB Axles
- Q&A: Replacement Brake Assemblies for AL-KO T-44 Axles
- Q&A: Where to Measure on Trailer Spindles to Determine Replacement Hubs
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Q&A: Electric Brake Assembly Replacements for Rockwell American 4704-L and R Assemblies
- Q&A: Double-Lip Grease Seals to Replace AL-KO Part 363497
- Video: Complete Breakdown of the Dexter Trailer Springs Over-Under Conversion Kit
- Video: Hands-On with the Dexter Trailer Springs Over-Under Conversion Kit
- Search Results: equalizer hitch
- Search Results: spindles only trailer axles
- Search Results: standard spindles trailer axles
- Search Results: round trailer spindles

