Replacement Straps for a Yakima SwingDaddy Bike Rack

Question

Question:

Hi, I need some replacement rubber chain straps for my Yakima Swing Daddy bike rack. Are the expensive Yakima branded ones my only option, or do you have an eTrailer option for these?

asked by: Taylor S

0

Expert Reply:

The Yakima SwingDaddy-specific straps are # 8890221 for three. The holes in these straps are 1/2 inch in diameter so you could really use any strap with 1/2 inch diameter holes. You could get a set of 4 Thule straps using # TH534 if you prefer.

There is also a pair of Curt straps you could use, # C18007.

Any of these 3 options would work since they all have about the same length and the holes are 1/2 inch in diameter.

expert reply by: Michael H

0

Answer 1

Looks like you have an older Yakima SwingDaddy so the correct replacement spring pin would be the part #8890314. If instead you are looking for a replacement hitch pin that secures it to the trailer hitch you would want the part #889-0231

view full answer...

Answer 2

The Replacement ZipStrip Straps #Y8890297 are the correct fit for your Yakima FullSwing 4 Bike Rack #Y02465.

view full answer...

Answer 3

The hitch bolt included in the Yakima Replacement Mounting Hardware for SwingDaddy Hitch Mounted Carrier #Y8890185 measures exactly 4.28 inches long with a 1/2 inch diameter and 13 pitch. If you only need the bolt and clip you can use part…

view full answer...

Answer 4

It looks like you purchased the Replacement Mounting Hardware, #Y8890185. This should have come with the square, black shank insert, a square nut that fits inside of the shank insert, a flat washer, a lock washer and a threaded pin and clip. I made a…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 8

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 11

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Replacement Straps for a Yakima SwingDaddy Bike Rack

Products Featured in This Question

Featured Help Information

Miscellaneous Media

Continue Researching