Looking for 30 Amp to 30 Amp RV Power Cords

Question

Question:

I am looking for a basic decent 30 amp extension chord to go from my TT to the 30 amp shore outlet- both ends are basic 30 amp Thanks

asked by: Jay L

0

Expert Reply:

We have a lot of 30 amp to 30 amp basic RV power cords and extensions. How long of a cable are you looking for? We have numerous sizes from 10 foot, # A10-3010EH, to 50 feet, # A10-3050E. I have included a link to the options for you.

There are many different kinds of 30 amp plugs and receptacles. The ones in the list below range from 110 Volts to 125 volts. There are also twist lock style plugs/receptacles. For those you would plug in the cable and twist to lock it into place. So in short when browsing for a cable make sure it meets what the RV requires!

expert reply by: Michael H

0

Answer 1

The SnapPads #SN39FR that you referred to are 5-1/2" in size and your metal pads are 5-3/4", so your feet are too big for the pads. You will need the #SN99FR pads designed for metal feet 5-3/4" to 6". Please measure all 4 feet…

view full answer...

Answer 2

For the Camco Power Grip RV Power Cord Adapter w/ Handles - 125V - 30 Amp Female to 50 Amp Male #CAM55175, the right extension cord really depends on how much length you need. - 25 Feet: Mighty Cord RV Extension Cord - 30 Amp #A10-3025E - 50 Feet:…

view full answer...

Answer 3

You can use an extension cord like the MightyCord 50' RV Extension Cord #A10-3050EH , which is the longest cord we have available, but that isn't going to be long enough. If you were to try connecting several cords together, you're going…

view full answer...

Answer 4

The plug of the Epicord Hardwire RV Power Cord #277-000146 is approximately 1-3/4" wide x 3" in depth so it would fit through your access hatch. It is the longest hardwire option that we currently offer at 30'. Since you're fine…

view full answer...

Answer 5

Yes it is okay to use two of the Mighty Cord 25' RV Power Cord Extension part #A10-3025E to acheive the same effect as the Mighty Cord 50' RV Power Cord Extension part #A10-3050E. They both use the same 10 gauge wire so it will not cause you…

view full answer...

Answer 6

The voltage drop for two Mighty Cord 30 Amp RV Extension Cords - 25' part #A10-3025E combined or just the Mighty Cord 30 Amp RV Extension Cord - 50' part #A10-3050E is at most 2.4%.

view full answer...

Answer 7

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 8

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 9

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 10

Hi Donny; after looking at several videos of the trailer it does appear to have a 6 on 5-1/2 bolt pattern with ST225/75R15 tires. The Goodyear Endurance ST225/75R15 Radial Tire w/ 15" Eagle Aluminum Wheel #GY97QB will be a direct fit.

view full answer...

Answer 11

Hello Jason, Thanks for writing in. For your 2026 Forest River R-Pod 192, you'll need the SnapPad SnapJack SJ RV Scissor Jack Pads #SN32FR for the four scissor stabilizer jacks and the SnapPad TJ Trailer Tongue Jack Pad #SN77VR for the rounded…

view full answer...

Looking for 30 Amp to 30 Amp RV Power Cords

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching