bing tracking image
Q & A Icon

Wiring Diagrams for Installing PowerMax PMTS Series Automatic Transfer Switch # PM79FR  

Updated 07/08/2026 | Published 07/01/2026

Question:

I am considering purchasing the PowerMax PMTS Series 50 amp Automatic Transfer Switch. I am installing a 3000w Inverter 30 amp to my 50 amp travel trailer. The TT was prewired for a second AC Not Installed. I am looking for a wire diagram showing the proper wiring for the transfer switch. 50 amp shore power in, 50 amp RV power panel and a 30 amp Inverter. If you need more info please let me know. Joe

0

Expert Reply:

Hey Joe, I attached a picture of the wiring diagram for the PowerMax PMTS Series Automatic Transfer Switch # PM79FR for you to check out below this message. It shows the connections you'll need to make to install this. With the door open you can see all of the labels on the unit itself as well.

expert reply by:
0
Jameson C
Wiring Diagram
Wiring Diagram
(click to enlarge)
Panel Connections
Panel Connections
(click to enlarge)
Joe G. profile picture

Joe G.

7/8/2026

Jameson, Thank you for your reply and the wiring diagram with picture. This helps me out a lot. I can move forward with confidence. Joe

Jameson C. profile picture
Etrailer Expert

Jameson C.

7/8/2026

@JoeG glad to help!
Joe G. profile picture

Joe G.

7/8/2026

Jameson, A couple more questions. I presume I will use the “generator” connections for the 3000W inverter IN. The inverter will only have L1 going into the ATS as it is 30 amps. I then will jumper L1 and L2 in the inverter input (generator) connectors so that when the inverter is powering the Control Panel both legs on the control panel will share the power from the inverter. Again, I will not run AC units while in inverter. Thanks in advance for your reply. Joe

Jameson C. profile picture
Etrailer Expert

Jameson C.

7/8/2026

@JoeG Yeah all of that checks out!

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>