Recommended Stabilizing Kit for Lippert Auto Leveling System on 2017 Keystone Sprinter 5th Wheel

Question

Question:

I have a 2017 keystone sprinter 5th wheel. Model # 3340/41FWFLS. It has the auto level system on it 4 jacks. Looking for the full jack stabilizer kit to do all 4 jacks to get the rocking and swaying out of it.

asked by: Heath W

0

Expert Reply:

The auto leveling system on your 2017 Keystone Sprinter is a Lippert auto leveling system, so the stabilizers that I recommend are the JT's Strong Arm Jack Stabilizer Kit which are also by Lippert and confirmed to work.

If you have more than 58 inches between your front landing gear legs, then you will want part # LC191023. If you have less than 58 inches, then you will want part # LC191024.

You will also need the Adapter Lug, # LC314592, for the rear leveling legs.

expert reply by: John H

0

Jeremy S.

5/17/2020

I have a 2020 Keystone Cougar 32BHS with Lippert Ground Control Leveling System. Can recommend the best stabilizer kit for my fifth wheel?

Chris R.

5/20/2020

The JT's Strong Arm setups mentioned above (along with the adapter lug # LC314592) will work perfectly for your Keystone Cougar and is my recommendation. This will take out any of that extra movement you're experiencing when parked.

Jeremy S.

5/20/2020

@ChrisR, How many lugs will I need to complete the setup?

Chris R.

5/22/2020

@JeremyS You will need 6 lugs in total - so you'll want to order 3 of the Adapter Lug # LC314592.

See All (5) Replies to Jeremy S. ∨

Answer 1

The skid plate on your B&W Companion OEM 5th-Wheel Hitch part #BWRVK3300 should have been lubed prior to hitching the trailer per the owner's manual for the unit which is attached for you. The worn powder coat is not a huge deal but there may…

view full answer...

Answer 2

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 3

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Answer 4

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 5

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

Hey Neil. The 18,000 Btu Furrion Chill Cube RV Air Conditioner item #LC34DX fits a 14-1/4" x 14-1/4" cutout which is pretty standard on RV's. If you meant to write Dometic instead of domestic then yes it'll fit in your existing…

view full answer...

Answer 8

Hey Matt, so the biggest difference between the Hellwig and Roadmaster sway bars that fit your 2022 Ford F-350 is the diameter of them which is what directly influences how stiff they are. The Hellwigs are a smaller diameter than the Roadmaster so…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 11

With a 2022 F350 short bed, hitting the top of the bed rails should not be an issue with most campers. Turning clearance however, will certainly be a factor. That is one advantage of the Andersen Ultimate hitch #AM3200, as it provides a 9"…

view full answer...

Answer 12

Hey Paul, we have great hitch solutions for the OEM pucks of your 2024 Ford F-350 short bed but whether or not you need a slider hitch is going to be based on the design of the trailer you plan to tow. Normally with a short bed truck you need a…

view full answer...

Recommended Stabilizing Kit for Lippert Auto Leveling System on 2017 Keystone Sprinter 5th Wheel

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching