Single Lippert Trailer Shock and Diameter of Shock # LC283280

Question

Question:

What is the part number to buy just the shocks? Dont need the kit with brackets. Also, what is the diameter of these shocks? Thanks.

asked by: Kenneth J

0

Expert Reply:

For a single shock use # LC283280. The larger part of the shock has an outer diameter of 2 inches. The smaller part has an outer diameter of 1-5/8 inches. I used digital calipers to measure and it was right on the money; 2.00 inches and 1.625 inches.

expert reply by: Michael H

0

Answer 1

I'm not exactly sure what you are asking; if it is about how to mount the Lippert shocks, the figure you referenced is simply a part of those directions. If you would like to clarify please let me know so I can get a better idea of what you are…

view full answer...

Answer 2

Hey Leonard, We don't currently offer the Dexter 052-003-00 but you could use the Lippert Standard Replacement Shock #LC283271 if you have a 3,500lb axle or the Lippert Heavy-Duty Replacement Shock #LC283280 if you have a 3,500 - 7,000lb axle.

view full answer...

Answer 3

Most likely we have parts that will be compatible with your Fayette axles but unfortunately I wasn't able to locate any specific information for the axles on your trailer using the numbers that you found on the tag. If they are round axles you…

view full answer...

Answer 4

I will be happy to help explain how you would measure a shock such as #LC283280. Basically, you will compress the shock all the way (A) then mark the inner leg where the outer leg stops. Then release compression and measure the stroke (how far the…

view full answer...

Answer 5

The best way to determine which replacement shocks will work is by matching up the length of the old ones as close as possible and then also using the GVWR of the trailer. If your brackets are 12-1/2" apart, and the GVWR of your trailer is…

view full answer...

Answer 6

The best shocks for your 2020 Jayco Eagle HT 28.5 RSTS 5th Wheel are going to be the Roadmaster Comfort Ride Shock Absorbers for Tandem Axle Trailers item #RM-2460. This system has nitrogen-charged shock absorbers that help to eliminate trailer…

view full answer...

Answer 7

According to the online user guide, a 2018 cougar 24sawbe has a GVWR of 7,800 lbs, meaning it likely used a pair of 3,500 lb axles. A great shock kit for this setup will be the Lippert Bolt-On Shock Kit #LC281255. In order to determine if this will…

view full answer...

Answer 8

The Lippert shocks part #LC283280 that you referenced could work but it's going to require you to measure the distance between the mounts for the shocks and see if the range of this shock would work properly. This shock has a compressed length of…

view full answer...

Answer 9

We don't have a way to look up what the shock specs of your 2003 Hitchhiker II are but it's possible we have a replacement solution. If you can take your current shocks off and the compressed length is 8-5/8 inch and extended is 13-1/2 inch…

view full answer...

Answer 10

You are correct, your 2021 Jayco Eagle HT does not need the full kit #LC281281. All you need to add shocks to your trailer is the Lippert Heavy-Duty Replacement Shock #LC283280. This is a single shock so you will need to order a quantity of 4. They…

view full answer...

Answer 11

We have shock #LC283280 but its compressed length is 8-5/8 inches. We are measuring that from inside washer to inside washer though so if you are measuring differently it is possible that this shock will work. I have linked a video of this shock for…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Single Lippert Trailer Shock and Diameter of Shock # LC283280

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching