RV Porch Light With Mounting Hole Dimensions 5-1/4 Inch Apart

Updated 05/22/2018 | Published 05/21/2018

Products Featured in This Question

Low Profile LED Utility Light - 204 Lumens - Surface Mount - Clear Lens - Warm White

(29)

$36.31

LED RV Utility Light - Surface Mount - 4 Diodes - Wedge Base - Clear Lens

(38)

$40.96

LED RV Utility Light with Switch - Surface Mount - 4 Diodes - Wedge Base - Clear Lens

(38)

$39.12

Question:

Porch light for a 2001 Forest River Cherokee 31foot Travel Trailer. The ones I see on line have holes 4inch apart, but the old one has holes 5 1/4inch apart. Is redrilling the holes for the new light the only option? Size over all matches, just not the screw holes across. Vertical is good at 1 1/8.

asked by: Bob R

Helpful Expert Reply:

I checked all of the porch lights that we have, and if you need holes 5-1/4" apart, re-drilling may be the best option because we don't carry any lights with 5-1/4" between the holes. It is not uncommon for trailer light manufacturers to discontinue models after only a few years. So for a trailer manufactured in 2001 there is a good chance that the exact replacements aren't available anymore. The base of # RVPL1C is going to cover up the old mounting holes and as long as you sealed the base to the side of the trailer, you won't have to worry about water or insects getting in through the old holes.

I also found lights with mounting hole dimension center to center of 4-3/4" # 328-K-0054B, # 328-007-61W, and # 328-K-0054BS.

expert reply by: Timothy G