Search: stl57rb   >  

For your Karavan trailer I recommend LED tail lights #STL57RB and #STL56RB. They are a little shorter at 6-1/16 inches but they do mount on studs spaced 2 inches apart on center. they are 3-5/8 inches tall and 2-1/4 inches deep overall. I have…

To install your Reese Pod brake controller in your 2018 Ford Explorer will require the install harness part #3035-P which is a confirmed fit. If you check out the 9:55 mark of the install video I attached to this page you'll see where to find…

The tail light we offer that comes the closest to the dimensions you referenced is the Optronics part #STL56RB. This is a submersible, 18-diode tail light. The measurements for this light are 6-1/16 inches long x 3-5/8 inches wide x 2-1/4 inches…

The code SAE P2 91 DOT on the light lens is the lens rating, not a part number, so it is difficult to go by that number. Often the actual part number for a light will be on the back of the light base or housing. If not, it is usually easiest to go by…

In order to utilize an underbed mounting system on your 2005 Ford F-350 you will first need to obtain the Under-Bed Rail and Installation Kit for Reese Elite Series part #RP30073. Once you have this installed you are then going to need a few adapters…

In order to convert a Dexter 10K Axle (Made After May 2013) from electric drum to hydraulic disc brakes you'll need the following: Kodiak Disc Brake Kit part #K2R1058D11E (1 per Axle) Dexter Oil Hub for 9K to 10K General Duty Axles part…

The Kodiak Disc Brake Kit #K2R1058D11E is for 9,000-10,000 lb Dexter axles. Assuming you have a standard duty Dexter or Lippert 12,000 lb axle, the correct kit would be the Kodiak Disc Brake Kit - 11" Rotor - 8 on 6.5 - Raw Finish - Leaf Spring…

The D100G axles on your 2016 Diamond C trailer are 10,000 lb axles. Based on the manufacture date you need the Kodiak Disc Brake Kit - 11" Rotor - 8 on 6-1/2 - E-Coat Finish - Leaf Spring - 10,000-lb Dexter #K2R1058D11E which fits the…

Since you have dually Dexter 10k axles with wheels larger than 16 inch you'd want the Kodiak Disc Brake Kit part #K2R1058D11E which is correct for this axle capacity and type. When it's time to pick out an electric over hydraulic actuator I…

Yes, the Kodiak Disc Brake Kit #K2R1058D11E will fit your Dexter 10,000LB general duty axle manufactured in 2019.

The appropriate torque spec for any application will vary depending on the construction of the wheel as well as on the stud size. I suggest checking the wheels you're using to see if their manufacturer has a suggested torque rating. Steel trailer…

The Equal-I-zer, #EQ37100ET, and Reese Strait-Line, #RP66084, weight distribution systems are both top notch systems that will get the job done for you, but I usually tend to lean towards the Equal-I-zer systems for a few reasons. First, Equal-I-zer…