Bolts for Demco A-Frame Trailer Coupler

Question

Question:

I wondering if the bolts were include for the bolt on A frame coupler? And if they are not, then what type bolts do I have to use?

asked by: David

0

Expert Reply:

The Demco A-Frame Trailer Coupler # DM14793-81 (Black) or # DM14793-52 (Silver) do not come with bolts. You will need to use 1/2" Grade 5 hex bolts with them. I've added links to video reviews of each coupler for you to check out.

expert reply by: Kyle S

0

Answer 1

I do have an option for you but I don't have any way to reduce the ground clearance of your existing a-frame jack . That said, what you can do to fix this issue is replace your existing jack with the Ultimate Trailer Jack part #322-RDJ-2K. The…

view full answer...

Answer 2

I'd be happy to help you out with your questions on the Demco A-Frame Trailer Coupler #DM14793-52. 1. Yes, you can remove your old welded on coupler by using a grinder to cut the welds. Another popular option is to use a torch to cut the welds…

view full answer...

Answer 3

Hey Fred, The etrailer Sleeve-Lock A-Frame Trailer Coupler #CA-5196-B wasn't designed to be bolted on so I can not confirm that drilling and bolting it to the trailer tongue would be acceptable. I will say that most couplers designed to bolt on…

view full answer...

Answer 4

Yes, you can absolutely drill holes in your trailer tongue to install the 10,000 lb capacity Buyers Products Straight Tongue Trailer Coupler #3370091560. This is a pretty common occurrence due to the various bolt hole patterns of straight tongue…

view full answer...

Answer 5

Almost all A-frame jacks now have the triangle or round mounting plate with the 3 bolt-3 inch on center holes. We do not carry anything that has the 4 holes. We do have some electric jacks like the Stromberg Carlson Electric Trailer Jack - Drop Leg -…

view full answer...

Answer 6

The only differences between the Demco eZ-Latch Couplers #DM37ZR and #DM14793-81 is that the former has integrated loop holes for installing safety chains and a about a 2" drop while the latter doesn't come with provisions for attaching the…

view full answer...

Answer 7

Hello Al, thanks for reaching out. The A-Frame Trailer Coupler #CA-5210-B and the Demco A-Frame Trailer Coupler #DM14793-81 are interchangeable. They both fit a 50" degree A-frame which is standard. I would be surprised to hear that your A-frame…

view full answer...

Answer 8

For the Demco A-Frame Trailer Coupler #DM14793-81 you can use the etrailer #e98887. This will fit the pin hole on the coupler keeping it secure. Another option is the #e98893 which fits over the coupler and blocks the ball opening. You could also use…

view full answer...

Answer 9

A standard 50 degree coupler like #DM14793-81 will work on your custom 45 degree frame with a little modification. Without welding shims the coupler will not have the strength, so you will need to make some adjustments to your current tongue design.…

view full answer...

Answer 10

From the rear of the coupler portion on the Demco A-Frame Coupler #DM14793-81 to the center of the center bolt hole there is a distance of 4-1/2 inches. From the rear of the A-Frame mount to the center of the center hole there is a distance of 4-3/4…

view full answer...

Answer 11

I went to our warehouse and measured the Demco A-Frame Trailer Coupler #DM14793-81 to get you the dimensions you need. From the UNDERSIDE of the top plate, the part of the coupler that will actually contact the top of the A-frame, the hole centers…

view full answer...

Answer 12

Someone else has recently asked that question and a coworker made a lovely picture showing the measurement you are looking for on coupler #BD43805W0317. I have included that picture for you here. The inner width is 10-1/4 inches and the outer is…

view full answer...

Bolts for Demco A-Frame Trailer Coupler

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching