The factory brake controller connector on your 2021 Jeep Grand Cherokee is located under the dash behind the hood latch, as shown in the provided photo. Keep in mind, the connector will only be there if the vehicle has the factory tow package which…
We offer the InfiniteRule Hitch Lock for 3" Hitches #34065034 that we know fits and works great to lock the ball mount platform of the BulletProof Hitch #MD206 that you referenced. The span of this is 3-7/8 inches and the diameter is 5/8 inch.
The span you refer to on the etrailer Trailer Hitch Receiver Lock for 2" Hitches #e98880 is the usable length of the pin. To properly measure for this, you can measure the outside walls of your hitch at the pin hole. If you measured, and got…
I did some research and it looks like your U-Haul trailer will accept 1 7/8"- 2" ball, so #e98893 will be the correct part, although you should double check yourself. If it turns out yours is larger than that, part #e98894 will work accept…
Hey Heather, unfortunately the Master Lock Trailer Hitch Receiver Lock and Coupler Lock Set #3794DAT is keyed unique so it's not available to be keyed alike. Instead, you'd have to use something like the Master Lock Set #ML44VR which come…
I can only go by what the owner's manual for your 2014 Chevy Express Van lists and on the online version I was able to pull up it shows the following fuse locations for towing circuits inside the under-hood fuse block: #3 position - Trailer Right…
You are correct, there are 4 electric over hydraulic braking systems, from 3 manufacturers, that can be used to eliminate the air over hydraulic actuator on your M200A1 trailer. These systems all require a breakaway system to meet DOT safety…
Yes, you can use the Reese Friction Sway control part #83660 without a weight distribution system. You would just need to use the tab part #RP26003 on the ball mount as well.
Jorge, unfortunately that's way too heavy for the Maxtrax MKII Recovery Boards #RR33QP. These boards have a capacity of around 10,000 lbs, but some customers have reported being able to use trucks weighing in excess of 15,000 lbs.
The Maxtrax MKII Recovery Boards #RR33QP don't have a weight capacity as they will be able to handle the weight of any vehicles needing to use them. When you start to get into really big rigs that get stuck, those things need a recovery team as…
Hello Al, thanks for reaching out. The A-Frame Trailer Coupler #CA-5210-B and the Demco A-Frame Trailer Coupler #DM14793-81 are interchangeable. They both fit a 50" degree A-frame which is standard. I would be surprised to hear that your A-frame…
The Demco A-Frame Trailer Coupler #DM14793-81 (Black) or #DM14793-52 (Silver) do not come with bolts. You will need to use 1/2" Grade 5 hex bolts with them. I've added links to video reviews of each coupler for you to check out.
Filters
